From: Sam Ravnborg Date: Wed, 8 Apr 2020 19:50:36 +0000 (+0200) Subject: dt-bindings: display: add te-gpios to panel-common X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=1e4fbcdf8a0319916b1172518f8ccd35bfa24b80;p=linux.git dt-bindings: display: add te-gpios to panel-common Several bindings specifies a "te-gpios" for tearing effect signal. Add this to panel-common so we have a shared definition. Signed-off-by: Sam Ravnborg Reviewed-by: Rob Herring Cc: Thierry Reding Cc: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-4-sam@ravnborg.org --- diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml index dd97907a74504..17b8367f12dd9 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml @@ -124,6 +124,13 @@ properties: while active. Active high reset signals can be supported by inverting the GPIO specifier polarity flag. + te-gpios: + maxItems: 1 + description: + GPIO spec for the tearing effect synchronization signal. + The tearing effect signal is active high. Active low signals can be + supported by inverting the GPIO specifier polarity flag. + # Power power-supply: description: