From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Date: Tue, 12 Jun 2018 14:48:06 +0000 (+0100)
Subject: arm64: dts: apq8096-db820c: disable uart0 by default
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=1ebb2709ba39bf291a30dc1fcf937f46c4675f4d;p=linux.git

arm64: dts: apq8096-db820c: disable uart0 by default

Access to UART0 is disabled by bootloaders. By leaving it enabled by
default would reboot the board.
Disable this for now, this would alteast give a board which boots.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
---

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 0f829db33efe2..4d5ef01f43a33 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -75,7 +75,7 @@
 
 		serial@75b1000 {
 			label = "LS-UART0";
-			status = "okay";
+			status = "disabled";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&blsp2_uart2_4pins_default>;
 			pinctrl-1 = <&blsp2_uart2_4pins_sleep>;