From: Chris Packham <chris.packham@alliedtelesis.co.nz>
Date: Sun, 5 Dec 2021 22:56:17 +0000 (+1300)
Subject: arm/arm64: dts: Enable CP0 GPIOs for CN9130-CRB
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=1f1cb308abc5272551b7db9c0d31733478f829bf;p=linux.git

arm/arm64: dts: Enable CP0 GPIOs for CN9130-CRB

Enable the CP0 GPIO devices for the CN9130-CRB. This is needed for a
number of the peripheral devices to function.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---

diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
index 505ae69289f6d..c491e33794054 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -17,6 +17,8 @@
 		ethernet0 = &cp0_eth0;
 		ethernet1 = &cp0_eth1;
 		ethernet2 = &cp0_eth2;
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
 	};
 
 	memory@0 {
@@ -114,6 +116,14 @@
 	};
 };
 
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
 &cp0_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&cp0_i2c0_pins>;