From: Andrew Halaney Date: Thu, 17 Aug 2023 21:37:16 +0000 (-0500) Subject: arm64: dts: qcom: sa8775p-ride: Describe sgmii_phy0 irq X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=1ff6569b0ffe7a2e311104cb3cd841983e484ac9;p=linux.git arm64: dts: qcom: sa8775p-ride: Describe sgmii_phy0 irq There's an irq hooked up, so let's describe it. Prior to commit 9757300d2750 ("pinctrl: qcom: Add intr_target_width field to support increased number of interrupt targets") one would not see the IRQ fire, despite some (invasive) debugging showing that the GPIO was in fact asserted, resulting in the interface staying down. Now that the IRQ is properly routed we can describe it. Signed-off-by: Andrew Halaney Reviewed-by: Bartosz Golaszewski Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20230817213815.638189-2-ahalaney@redhat.com Signed-off-by: Bjorn Andersson --- diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts index 81a7eeb9cfcd2..8fde6935cd6ec 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -285,6 +285,7 @@ compatible = "ethernet-phy-id0141.0dd4"; reg = <0x8>; device_type = "ethernet-phy"; + interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>; reset-assert-us = <11000>; reset-deassert-us = <70000>;