From: Jai Luthra <j-luthra@ti.com>
Date: Fri, 1 Dec 2023 05:09:17 +0000 (+0530)
Subject: arm64: dts: ti: k3-am62-main: Enable CSI2-RX
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=2017f5a610a998cd414c7d9e8b19051014f3126b;p=linux.git

arm64: dts: ti: k3-am62-main: Enable CSI2-RX

The CSI2RX subsystem can be used to capture video frames from CSI-2
cameras. Add nodes for the CSI core, SHIM layer, and the DPHY.

Tested-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231201-csi_dts-v3-2-9f06f31080fe@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
---

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 0643cd15eeec2..49000a97c153f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -972,4 +972,66 @@
 		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
 		status = "disabled";
 	};
+
+	ti_csi2rx0: ticsi2rx@30102000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		dmas = <&main_bcdma 0 0x4700 0>;
+		dma-names = "rx0";
+		reg = <0x00 0x30102000 0x00 0x1000>;
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		cdns_csi2rx0: csi-bridge@30101000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x30101000 0x00 0x1000>;
+			clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
+				<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy0>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi0_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi0_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi0_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi0_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi0_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	dphy0: phy@30110000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x30110000 0x00 0x1100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
 };