From: Matthew Hagan Date: Mon, 2 May 2022 22:33:15 +0000 (+0100) Subject: net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONT X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=2069624dac19d62c558bb6468fe03678553ab01d;p=linux.git net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONT As noted elsewhere, various GPON SFP modules exhibit non-standard TX-fault behaviour. In the tested case, the Huawei MA5671A, when used in combination with a Marvell mv88e6085 switch, was found to persistently assert TX-fault, resulting in the module being disabled. This patch adds a quirk to ignore the SFP_F_TX_FAULT state, allowing the module to function. Change from v1: removal of erroneous return statment (Andrew Lunn) Signed-off-by: Matthew Hagan Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220502223315.1973376-1-mnhagan88@gmail.com Signed-off-by: Jakub Kicinski --- diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index 4dfb79807823d..9a5d5a10560fb 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -250,6 +250,7 @@ struct sfp { struct sfp_eeprom_id id; unsigned int module_power_mW; unsigned int module_t_start_up; + bool tx_fault_ignore; #if IS_ENABLED(CONFIG_HWMON) struct sfp_diag diag; @@ -1956,6 +1957,12 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report) else sfp->module_t_start_up = T_START_UP; + if (!memcmp(id.base.vendor_name, "HUAWEI ", 16) && + !memcmp(id.base.vendor_pn, "MA5671A ", 16)) + sfp->tx_fault_ignore = true; + else + sfp->tx_fault_ignore = false; + return 0; } @@ -2409,7 +2416,10 @@ static void sfp_check_state(struct sfp *sfp) mutex_lock(&sfp->st_mutex); state = sfp_get_state(sfp); changed = state ^ sfp->state; - changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT; + if (sfp->tx_fault_ignore) + changed &= SFP_F_PRESENT | SFP_F_LOS; + else + changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT; for (i = 0; i < GPIO_MAX; i++) if (changed & BIT(i))