From: Heiko Stuebner Date: Sun, 7 Jun 2020 21:29:09 +0000 (+0200) Subject: arm64: dts: rockchip: fix rk3368-lion gmac reset gpio X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=2300e6dab473e93181cf76e4fe6671aa3d24c57b;p=linux.git arm64: dts: rockchip: fix rk3368-lion gmac reset gpio The lion gmac node currently uses opposite active-values for the gmac phy reset pin. The gpio-declaration uses active-high while the separate snps,reset-active-low property marks the pin as active low. While on the kernel side this works ok, other DT users may get confused - as seen with uboot right now. So bring this in line and make both properties match, similar to the other Rockchip board. Fixes: d99a02bcfa81 ("arm64: dts: rockchip: add RK3368-uQ7 (Lion) SoM") Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20200607212909.920575-1-heiko@sntech.de --- diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi index e17311e090826..216aafd90e7f1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi @@ -156,7 +156,7 @@ pinctrl-0 = <&rgmii_pins>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; - snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; + snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; tx_delay = <0x10>; rx_delay = <0x10>; status = "okay";