From: Frieder Schrempf Date: Mon, 27 Nov 2023 11:22:26 +0000 (+0100) Subject: usb: misc: onboard_usb_hub: Add support for Cypress CY7C6563x X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=24af68a0ed53629bdde7b53ef8c2be72580d293b;p=linux.git usb: misc: onboard_usb_hub: Add support for Cypress CY7C6563x The Cypress CY7C6563x is a 2/4-port USB 2.0 hub. Add support for this hub in the driver in order to bring up reset, supply or clock dependencies. There is no reset pulse width given in the datasheet so we expect a minimal value of 1us to be enough. This hasn't been tested though due to lack of hardware which has the reset connected to a GPIO. Signed-off-by: Frieder Schrempf Link: https://lore.kernel.org/r/20231127112234.109073-3-frieder@fris.de Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c index 3b209104f648f..c09fb6bd7d7d7 100644 --- a/drivers/usb/misc/onboard_usb_hub.c +++ b/drivers/usb/misc/onboard_usb_hub.c @@ -441,6 +441,7 @@ static void onboard_hub_usbdev_disconnect(struct usb_device *udev) static const struct usb_device_id onboard_hub_id_table[] = { { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6504) }, /* CYUSB33{0,1,2}x/CYUSB230x 3.0 */ { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6506) }, /* CYUSB33{0,1,2}x/CYUSB230x 2.0 */ + { USB_DEVICE(VENDOR_ID_CYPRESS, 0x6570) }, /* CY7C6563x 2.0 */ { USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 */ { USB_DEVICE(VENDOR_ID_GENESYS, 0x0610) }, /* Genesys Logic GL852G USB 2.0 */ { USB_DEVICE(VENDOR_ID_GENESYS, 0x0620) }, /* Genesys Logic GL3523 USB 3.1 */ diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h index 292110e64a1d9..f360d5cf8d8a0 100644 --- a/drivers/usb/misc/onboard_usb_hub.h +++ b/drivers/usb/misc/onboard_usb_hub.h @@ -36,6 +36,11 @@ static const struct onboard_hub_pdata cypress_hx3_data = { .num_supplies = 2, }; +static const struct onboard_hub_pdata cypress_hx2vl_data = { + .reset_us = 1, + .num_supplies = 1, +}; + static const struct onboard_hub_pdata genesys_gl850g_data = { .reset_us = 3, .num_supplies = 1, @@ -61,6 +66,7 @@ static const struct of_device_id onboard_hub_match[] = { { .compatible = "usb451,8142", .data = &ti_tusb8041_data, }, { .compatible = "usb4b4,6504", .data = &cypress_hx3_data, }, { .compatible = "usb4b4,6506", .data = &cypress_hx3_data, }, + { .compatible = "usb4b4,6570", .data = &cypress_hx2vl_data, }, { .compatible = "usb5e3,608", .data = &genesys_gl850g_data, }, { .compatible = "usb5e3,610", .data = &genesys_gl852g_data, }, { .compatible = "usb5e3,620", .data = &genesys_gl852g_data, },