From: Hugo Villeneuve Date: Tue, 4 Jul 2023 13:48:00 +0000 (-0400) Subject: arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=253be5b53c2792fb4384f8005b05421e6f040ee3;p=linux.git arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux For SOMs with an onboard PHY, the RESET_N pull-up resistor is currently deactivated in the pinmux configuration. When the pinmux code selects the GPIO function for this pin, with a default direction of input, this prevents the RESET_N pin from being taken to the proper 3.3V level (deasserted), and this results in the PHY being not detected since it is held in reset. Taken from RESET_N pin description in ADIN13000 datasheet: This pin requires a 1K pull-up resistor to AVDD_3P3. Activate the pull-up resistor to fix the issue. Fixes: ade0176dd8a0 ("arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module") Signed-off-by: Hugo Villeneuve Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi index d3a67109d55b2..b8946edf317bd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi @@ -358,7 +358,7 @@ MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f - MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x159 >; };