From: Soeren Moch Date: Thu, 3 Oct 2019 21:50:35 +0000 (+0200) Subject: arm64: dts: rockchip: fix RockPro64 sdhci settings X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=2558b3b1b11a1b32b336be2dd0aabfa6d35ddcb5;p=linux.git arm64: dts: rockchip: fix RockPro64 sdhci settings The RockPro64 schematics [1], [2] show that the rk3399 EMMC_STRB pin is connected to the RESET pin instead of the DATA_STROBE pin of the eMMC module. So the data strobe cannot be used for its intended purpose on this board, and so the HS400 eMMC mode is not functional. Limit the controller to HS200. [1] http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf [2] http://files.pine64.org/doc/rock64/PINE64_eMMC_Module_20170719.pdf Fixes: e4f3fb490967 ("arm64: dts: rockchip: add initial dts support for Rockpro64") Signed-off-by: Soeren Moch Link: https://lore.kernel.org/r/20191003215036.15023-2-smoch@web.de Signed-off-by: Heiko Stuebner --- diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts index 98a5f323bc1d3..aa06a6587a11e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -636,8 +636,7 @@ &sdhci { bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; + mmc-hs200-1_8v; non-removable; status = "okay"; };