From: Martin Blumenstingl Date: Sun, 17 Nov 2019 13:59:23 +0000 (+0100) Subject: dt-bindings: clock: meson8b: add the clock inputs X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=25d316989e2b1beebaa69e6c3e76e762776c93de;p=linux.git dt-bindings: clock: meson8b: add the clock inputs The clock controller on Meson8/Meson8b/Meson8m2 has three (known) inputs: - "xtal": the main 24MHz crystal - "ddr_pll": some of the audio clocks use the output of the DDR PLL as input - "clk_32k": an optional clock signal which can be connected to GPIOAO_6 (which then has to be switched to the CLK_32K_IN function) Add the inputs to the documentation so we can wire up these inputs in a follow-up patch. Reviewed-by: Rob Herring Signed-off-by: Martin Blumenstingl Signed-off-by: Jerome Brunet --- diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt index 4d94091c1d2d8..cc51e4746b3b7 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt @@ -11,6 +11,11 @@ Required Properties: - "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs - #clock-cells: should be 1. - #reset-cells: should be 1. +- clocks: list of clock phandles, one for each entry in clock-names +- clock-names: should contain the following: + * "xtal": the 24MHz system oscillator + * "ddr_pll": the DDR PLL clock + * "clk_32k": (if present) the 32kHz clock signal from GPIOAO_6 (CLK_32K_IN) Parent node should have the following properties : - compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon"