From: William Zhang Date: Fri, 23 Feb 2024 03:47:51 +0000 (-0800) Subject: dt-bindings: mtd: brcmnand: Add ecc strap property X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=280962d413e873c7b2ff82b0767d04c60cbe0615;p=linux.git dt-bindings: mtd: brcmnand: Add ecc strap property Add brcm,nand-ecc-use-strap to get ecc and spare area size settings from board boot strap for broadband board designs because they do not specify ecc setting in dts but rather using the strap setting. Signed-off-by: William Zhang Reviewed-by: Conor Dooley Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-7-william.zhang@broadcom.com --- diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml index 6a717bcedfd39..064e840aeaa11 100644 --- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml +++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml @@ -146,6 +146,15 @@ patternProperties: layout. $ref: /schemas/types.yaml#/definitions/uint32 + brcm,nand-ecc-use-strap: + description: + This property requires the host system to get the ECC related + settings from the SoC NAND boot strap configuration instead of + the generic NAND ECC settings. This is a common hardware design + on BCMBCA based boards. This strap ECC option and generic NAND + ECC option can not be specified at the same time. + $ref: /schemas/types.yaml#/definitions/flag + unevaluatedProperties: false allOf: @@ -195,6 +204,21 @@ allOf: required: - interrupt-names + - if: + patternProperties: + "^nand@[a-f0-9]$": + required: + - brcm,nand-ecc-use-strap + then: + patternProperties: + "^nand@[a-f0-9]$": + properties: + nand-ecc-strength: false + nand-ecc-step-size: false + nand-ecc-maximize: false + nand-ecc-algo: false + brcm,nand-oob-sector-size: false + unevaluatedProperties: false required: