From: Anssi Hannula Date: Mon, 10 Oct 2022 18:52:27 +0000 (+0200) Subject: can: kvaser_usb: Fix possible completions during init_completion X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=2871edb32f4622c3a25ce4b3977bad9050b91974;p=linux.git can: kvaser_usb: Fix possible completions during init_completion kvaser_usb uses completions to signal when a response event is received for outgoing commands. However, it uses init_completion() to reinitialize the start_comp and stop_comp completions before sending the start/stop commands. In case the device sends the corresponding response just before the actual command is sent, complete() may be called concurrently with init_completion() which is not safe. This might be triggerable even with a properly functioning device by stopping the interface (CMD_STOP_CHIP) just after it goes bus-off (which also causes the driver to send CMD_STOP_CHIP when restart-ms is off), but that was not tested. Fix the issue by using reinit_completion() instead. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson Signed-off-by: Anssi Hannula Signed-off-by: Jimmy Assarsson Link: https://lore.kernel.org/all/20221010185237.319219-2-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde --- diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c index 7b52fda73d827..66f672ea631b8 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c @@ -1875,7 +1875,7 @@ static int kvaser_usb_hydra_start_chip(struct kvaser_usb_net_priv *priv) { int err; - init_completion(&priv->start_comp); + reinit_completion(&priv->start_comp); err = kvaser_usb_hydra_send_simple_cmd(priv->dev, CMD_START_CHIP_REQ, priv->channel); @@ -1893,7 +1893,7 @@ static int kvaser_usb_hydra_stop_chip(struct kvaser_usb_net_priv *priv) { int err; - init_completion(&priv->stop_comp); + reinit_completion(&priv->stop_comp); /* Make sure we do not report invalid BUS_OFF from CMD_CHIP_STATE_EVENT * see comment in kvaser_usb_hydra_update_state() diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c index 50f2ac8319ff8..19958037720f4 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c @@ -1320,7 +1320,7 @@ static int kvaser_usb_leaf_start_chip(struct kvaser_usb_net_priv *priv) { int err; - init_completion(&priv->start_comp); + reinit_completion(&priv->start_comp); err = kvaser_usb_leaf_send_simple_cmd(priv->dev, CMD_START_CHIP, priv->channel); @@ -1338,7 +1338,7 @@ static int kvaser_usb_leaf_stop_chip(struct kvaser_usb_net_priv *priv) { int err; - init_completion(&priv->stop_comp); + reinit_completion(&priv->stop_comp); err = kvaser_usb_leaf_send_simple_cmd(priv->dev, CMD_STOP_CHIP, priv->channel);