From: Mylène Josserand Date: Mon, 18 Mar 2019 10:39:38 +0000 (+0100) Subject: ASoC: simple-amplifier: Make gpio property optional X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=2944d29d7c89573f9aa47083d105ff0243d5a125;p=linux.git ASoC: simple-amplifier: Make gpio property optional Some amplifier may not have a GPIO to control the power, but instead simply rely on the regulator to power up and down the amplifier. In order to support those setups, let's make the GPIO optional. Signed-off-by: Mylène Josserand Signed-off-by: Maxime Ripard Signed-off-by: Mark Brown --- diff --git a/Documentation/devicetree/bindings/sound/simple-amplifier.txt b/Documentation/devicetree/bindings/sound/simple-amplifier.txt index 7182ac4f1e658..b1b097cc9b68f 100644 --- a/Documentation/devicetree/bindings/sound/simple-amplifier.txt +++ b/Documentation/devicetree/bindings/sound/simple-amplifier.txt @@ -2,9 +2,9 @@ Simple Amplifier Audio Driver Required properties: - compatible : "dioo,dio2125" or "simple-audio-amplifier" -- enable-gpios : the gpio connected to the enable pin of the simple amplifier Optional properties: +- enable-gpios : the gpio connected to the enable pin of the simple amplifier - VCC-supply : power supply for the device, as covered in Documentation/devicetree/bindings/regulator/regulator.txt diff --git a/sound/soc/codecs/simple-amplifier.c b/sound/soc/codecs/simple-amplifier.c index c07e8a80b4b7d..351aa55c384e2 100644 --- a/sound/soc/codecs/simple-amplifier.c +++ b/sound/soc/codecs/simple-amplifier.c @@ -89,7 +89,8 @@ static int simple_amp_probe(struct platform_device *pdev) return -ENOMEM; platform_set_drvdata(pdev, priv); - priv->gpiod_enable = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); + priv->gpiod_enable = devm_gpiod_get_optional(dev, "enable", + GPIOD_OUT_LOW); if (IS_ERR(priv->gpiod_enable)) { err = PTR_ERR(priv->gpiod_enable); if (err != -EPROBE_DEFER)