From: Fabio Estevam <festevam@denx.de>
Date: Sat, 23 Sep 2023 18:29:06 +0000 (-0300)
Subject: ARM: dts: imx28-tx28: Move phy_type to USB node
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=2c9d0bd685b3323333cbc790c6c1e02c2ba8dd26;p=linux.git

ARM: dts: imx28-tx28: Move phy_type to USB node

phy_type is a property for the USB controller, not for the USB PHY.

Move it to the USB controller nodes to fix the following schema
warning:

imx28-tx28.dtb: usbphy@8007c000: 'phy_type' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
index 0391ffd15866c..153e4017951d8 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts
@@ -652,6 +652,7 @@
 	vbus-supply = <&reg_usb0_vbus>;
 	disable-over-current;
 	dr_mode = "peripheral";
+	phy_type = "utmi";
 	status = "okay";
 };
 
@@ -659,19 +660,18 @@
 	vbus-supply = <&reg_usb1_vbus>;
 	disable-over-current;
 	dr_mode = "host";
+	phy_type = "utmi";
 	status = "okay";
 };
 
 &usbphy0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&tx28_usbphy0_pins>;
-	phy_type = "utmi";
 	status = "okay";
 };
 
 &usbphy1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&tx28_usbphy1_pins>;
-	phy_type = "utmi";
 	status = "okay";
 };