From: Lev Popov Date: Mon, 26 Sep 2022 12:53:48 +0000 (+0200) Subject: arm64: dts: rockchip: fix quartz64-a bluetooth configuration X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=2dcd7e0c821fe9b663f7d3382b6d2faa8edf2129;p=linux.git arm64: dts: rockchip: fix quartz64-a bluetooth configuration For "Quartz64 Model A" add missing RTS line to the UART interface used by bluetooth and swap bluetooth host-wakeup and device-wakeup gpio pins to match the boards physical layout. This changes are necessary to make bluetooth provided by the wireless module work. Also set max-speed on the bluetooth device as it's not automatically detected. Fixes: b33a22a1e7c4 ("arm64: dts: rockchip: add basic dts for Pine64 Quartz64-A") Signed-off-by: Lev Popov Link: https://lore.kernel.org/r/20220926125350.64783-1-leo@nabam.net Signed-off-by: Heiko Stuebner --- diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts index a05460b924153..25a8c781f4e75 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts @@ -740,7 +740,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; status = "okay"; uart-has-rtscts; @@ -748,13 +748,14 @@ compatible = "brcm,bcm43438-bt"; clocks = <&rk817 1>; clock-names = "lpo"; - device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; vbat-supply = <&vcc_sys>; vddio-supply = <&vcca1v8_pmu>; + max-speed = <3000000>; }; };