From: Lubomir Rintel Date: Fri, 20 Dec 2019 06:53:13 +0000 (+0100) Subject: ARM: dts: mmp3: Add HSIC controllers X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=3240d5b872f24cc65f503246371a18551d730066;p=linux.git ARM: dts: mmp3: Add HSIC controllers There are two on MMP3, along with the PHYs. The PHYs are made compatible with the NOP transceiver, since there's no driver for the time being and they're likely configured by the firmware. Link: https://lore.kernel.org/r/20191220065314.237624-5-lkundrak@v3.sk Signed-off-by: Lubomir Rintel Reported-by: kbuild test robot Signed-off-by: Olof Johansson --- diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi index d9762de0ed34b..36c50706e60e0 100644 --- a/arch/arm/boot/dts/mmp3.dtsi +++ b/arch/arm/boot/dts/mmp3.dtsi @@ -201,6 +201,50 @@ status = "disabled"; }; + hsic_phy0: hsic-phy@f0001800 { + compatible = "marvell,mmp3-hsic-phy", + "usb-nop-xceiv", + reg = <0xf0001800 0x40>; + #phy-cells = <0>; + status = "disabled"; + }; + + hsic0: hsic@f0001000 { + compatible = "marvell,pxau2o-ehci"; + reg = <0xf0001000 0x200>; + interrupts = ; + clocks = <&soc_clocks MMP2_CLK_USBHSIC0>; + clock-names = "USBCLK"; + phys = <&hsic_phy0>; + phy-names = "usb"; + phy_type = "hsic"; + #address-cells = <0x01>; + #size-cells = <0x00>; + status = "disabled"; + }; + + hsic_phy1: hsic-phy@f0002800 { + compatible = "marvell,mmp3-hsic-phy", + "usb-nop-xceiv", + reg = <0xf0002800 0x40>; + #phy-cells = <0>; + status = "disabled"; + }; + + hsic1: hsic@f0002000 { + compatible = "marvell,pxau2o-ehci"; + reg = <0xf0002000 0x200>; + interrupts = ; + clocks = <&soc_clocks MMP2_CLK_USBHSIC1>; + clock-names = "USBCLK"; + phys = <&hsic_phy1>; + phy-names = "usb"; + phy_type = "hsic"; + #address-cells = <0x01>; + #size-cells = <0x00>; + status = "disabled"; + }; + mmc1: mmc@d4280000 { compatible = "mrvl,pxav3-mmc"; reg = <0xd4280000 0x120>;