From: Ivan Vecera Date: Thu, 30 Nov 2023 19:31:34 +0000 (+0100) Subject: i40e: Fix wrong mask used during DCB config X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=343bb39e1f25a73a38a03d98ca383495c0ed6e92;p=linux.git i40e: Fix wrong mask used during DCB config Mask used for clearing PRTDCB_RETSTCC register in function i40e_dcb_hw_rx_ets_bw_config() is incorrect as there is used define I40E_PRTDCB_RETSTCC_ETSTC_SHIFT instead of define I40E_PRTDCB_RETSTCC_ETSTC_MASK. The PRTDCB_RETSTCC register is used to configure whether ETS or strict priority is used as TSA in Rx for particular TC. In practice it means that once the register is set to use ETS as TSA then it is not possible to switch back to strict priority without CoreR reset. Fix the value in the clearing mask. Fixes: 90bc8e003be2 ("i40e: Add hardware configuration for software based DCB") Signed-off-by: Ivan Vecera Reviewed-by: Przemek Kitszel Reviewed-by: Simon Horman Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen --- diff --git a/drivers/net/ethernet/intel/i40e/i40e_dcb.c b/drivers/net/ethernet/intel/i40e/i40e_dcb.c index 9d88ed6105fd8..8db1eb0c1768c 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_dcb.c +++ b/drivers/net/ethernet/intel/i40e/i40e_dcb.c @@ -1523,7 +1523,7 @@ void i40e_dcb_hw_rx_ets_bw_config(struct i40e_hw *hw, u8 *bw_share, reg = rd32(hw, I40E_PRTDCB_RETSTCC(i)); reg &= ~(I40E_PRTDCB_RETSTCC_BWSHARE_MASK | I40E_PRTDCB_RETSTCC_UPINTC_MODE_MASK | - I40E_PRTDCB_RETSTCC_ETSTC_SHIFT); + I40E_PRTDCB_RETSTCC_ETSTC_MASK); reg |= FIELD_PREP(I40E_PRTDCB_RETSTCC_BWSHARE_MASK, bw_share[i]); reg |= FIELD_PREP(I40E_PRTDCB_RETSTCC_UPINTC_MODE_MASK,