From: Andrew Jeffery Date: Fri, 28 Jun 2019 02:38:31 +0000 (+0930) Subject: dt-bindings: pinctrl: aspeed: Split bindings document in two X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=34ae69998b665073bf27085e60b52329cf169e0d;p=linux.git dt-bindings: pinctrl: aspeed: Split bindings document in two Have one for each of the AST2400 and AST2500. The only thing that was common was the fact that both support ASPEED BMC SoCs. Cc: Johnny Huang Signed-off-by: Andrew Jeffery Acked-by: Joel Stanley Link: https://lore.kernel.org/r/20190628023838.15426-2-andrew@aj.id.au Signed-off-by: Linus Walleij --- diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.txt new file mode 100644 index 0000000000000..67e0325ccf2e0 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.txt @@ -0,0 +1,80 @@ +============================= +Aspeed AST2400 Pin Controller +============================= + +Required properties for the AST2400: +- compatible : Should be one of the following: + "aspeed,ast2400-pinctrl" + "aspeed,g4-pinctrl" + +The pin controller node should be the child of a syscon node with the required +property: + +- compatible : Should be one of the following: + "aspeed,ast2400-scu", "syscon", "simple-mfd" + "aspeed,g4-scu", "syscon", "simple-mfd" + +Refer to the the bindings described in +Documentation/devicetree/bindings/mfd/syscon.txt + +Subnode Format +============== + +The required properties of pinmux child nodes are: +- function: the mux function to select +- groups : the list of groups to select with this function + +Required properties of pinconf child nodes are: +- groups: A list of groups to select (either this or "pins" must be + specified) +- pins : A list of ball names as strings, eg "D14" (either this or "groups" + must be specified) + +Optional properties of pinconf child nodes are: +- bias-disable : disable any pin bias +- bias-pull-down: pull down the pin +- drive-strength: sink or source at most X mA + +Definitions are as specified in +Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt, with any +further limitations as described above. + +For pinmux, each mux function has only one associated pin group. Each group is +named by its function. The following values for the function and groups +properties are supported: + +ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6 +ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT EXTRST FLACK FLBUSY FLWP GPID GPID0 GPID2 +GPID4 GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 +I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCRST LPCSMI MAC1LINK MAC2LINK MDIO1 +MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1 NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4 +NDTR1 NDTR2 NDTR3 NDTR4 NDTS4 NRI1 NRI2 NRI3 NRI4 NRTS1 NRTS2 NRTS3 OSCCLK PWM0 +PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8 ROMCS1 +ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1 SD2 SGPMCK +SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI SIOPBO SIOPWREQ +SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU SPICS1 TIMER3 TIMER4 +TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USB11D1 USB11H2 USB2D1 +USB2H1 USBCKI VGABIOS_ROM VGAHS VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 +WDTRST2 + +Example +======= + +syscon: scu@1e6e2000 { + compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + + pinctrl: pinctrl { + compatible = "aspeed,g4-pinctrl"; + + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; + }; + + pinctrl_gpioh0_unbiased_default: gpioh0 { + pins = "A8"; + bias-disable; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.txt new file mode 100644 index 0000000000000..ca7025dc1901c --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.txt @@ -0,0 +1,119 @@ +============================= +Aspeed AST2500 Pin Controller +============================= + +Required properties for g5: +- compatible : Should be one of the following: + "aspeed,ast2500-pinctrl" + "aspeed,g5-pinctrl" + +- aspeed,external-nodes: A cell of phandles to external controller nodes: + 0: compatible with "aspeed,ast2500-gfx", "syscon" + 1: compatible with "aspeed,ast2500-lhc", "syscon" + +The pin controller node should be the child of a syscon node with the required +property: + +- compatible : Should be one of the following: + "aspeed,ast2500-scu", "syscon", "simple-mfd" + "aspeed,g5-scu", "syscon", "simple-mfd" + +Refer to the the bindings described in +Documentation/devicetree/bindings/mfd/syscon.txt + +Subnode Format +============== + +The required properties of pinmux child nodes are: +- function: the mux function to select +- groups : the list of groups to select with this function + +Required properties of pinconf child nodes are: +- groups: A list of groups to select (either this or "pins" must be + specified) +- pins : A list of ball names as strings, eg "D14" (either this or "groups" + must be specified) + +Optional properties of pinconf child nodes are: +- bias-disable : disable any pin bias +- bias-pull-down: pull down the pin +- drive-strength: sink or source at most X mA + +Definitions are as specified in +Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt, with any +further limitations as described above. + +For pinmux, each mux function has only one associated pin group. Each group is +named by its function. The following values for the function and groups +properties are supported: + +ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6 +ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT ESPI FWSPICS1 FWSPICS2 GPID0 GPID2 GPID4 +GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 +I2C7 I2C8 I2C9 LAD0 LAD1 LAD2 LAD3 LCLK LFRAME LPCHC LPCPD LPCPLUS LPCPME +LPCRST LPCSMI LSIRQ MAC1LINK MAC2LINK MDIO1 MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1 +NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4 NDTR1 NDTR2 NDTR3 NDTR4 NRI1 NRI2 +NRI3 NRI4 NRTS1 NRTS2 NRTS3 NRTS4 OSCCLK PEWAKE PNOR PWM0 PWM1 PWM2 PWM3 PWM4 +PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 RXD1 RXD2 RXD3 RXD4 SALT1 SALT10 +SALT11 SALT12 SALT13 SALT14 SALT2 SALT3 SALT4 SALT5 SALT6 SALT7 SALT8 SALT9 +SCL1 SCL2 SD1 SD2 SDA1 SDA2 SGPM SGPS1 SGPS2 SIOONCTRL SIOPBI SIOPBO SIOPWREQ +SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1CS1 SPI1DEBUG SPI1PASSTHRU SPI2CK SPI2CS0 +SPI2CS1 SPI2MISO SPI2MOSI TIMER3 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 +TXD3 TXD4 UART6 USB11BHID USB2AD USB2AH USB2BD USB2BH USBCKI VGABIOSROM VGAHS +VGAVS VPI24 VPO WDTRST1 WDTRST2 + +Example +======= + +ahb { + apb { + syscon: scu@1e6e2000 { + compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + + pinctrl: pinctrl { + compatible = "aspeed,g5-pinctrl"; + aspeed,external-nodes = <&gfx &lhc>; + + pinctrl_i2c3_default: i2c3_default { + function = "I2C3"; + groups = "I2C3"; + }; + + pinctrl_gpioh0_unbiased_default: gpioh0 { + pins = "A18"; + bias-disable; + }; + }; + }; + + gfx: display@1e6e6000 { + compatible = "aspeed,ast2500-gfx", "syscon"; + reg = <0x1e6e6000 0x1000>; + }; + }; + + lpc: lpc@1e789000 { + compatible = "aspeed,ast2500-lpc", "simple-mfd"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e789000 0x1000>; + + lpc_host: lpc-host@80 { + compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; + reg = <0x80 0x1e0>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80 0x1e0>; + + lhc: lhc@20 { + compatible = "aspeed,ast2500-lhc"; + reg = <0x20 0x24 0x48 0x8>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt deleted file mode 100644 index 8f1c5c4d62f92..0000000000000 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt +++ /dev/null @@ -1,172 +0,0 @@ -====================== -Aspeed Pin Controllers -====================== - -The Aspeed SoCs vary in functionality inside a generation but have a common mux -device register layout. - -Required properties for g4: -- compatible : Should be one of the following: - "aspeed,ast2400-pinctrl" - "aspeed,g4-pinctrl" - -Required properties for g5: -- compatible : Should be one of the following: - "aspeed,ast2500-pinctrl" - "aspeed,g5-pinctrl" - -- aspeed,external-nodes: A cell of phandles to external controller nodes: - 0: compatible with "aspeed,ast2500-gfx", "syscon" - 1: compatible with "aspeed,ast2500-lhc", "syscon" - -The pin controller node should be the child of a syscon node with the required -property: - -- compatible : Should be one of the following: - "aspeed,ast2400-scu", "syscon", "simple-mfd" - "aspeed,g4-scu", "syscon", "simple-mfd" - "aspeed,ast2500-scu", "syscon", "simple-mfd" - "aspeed,g5-scu", "syscon", "simple-mfd" - -Refer to the the bindings described in -Documentation/devicetree/bindings/mfd/syscon.txt - -Subnode Format -============== - -The required properties of pinmux child nodes are: -- function: the mux function to select -- groups : the list of groups to select with this function - -Required properties of pinconf child nodes are: -- groups: A list of groups to select (either this or "pins" must be - specified) -- pins : A list of ball names as strings, eg "D14" (either this or "groups" - must be specified) - -Optional properties of pinconf child nodes are: -- bias-disable : disable any pin bias -- bias-pull-down: pull down the pin -- drive-strength: sink or source at most X mA - -Definitions are as specified in -Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt, with any -further limitations as described above. - -For pinmux, each mux function has only one associated pin group. Each group is -named by its function. The following values for the function and groups -properties are supported: - -aspeed,ast2400-pinctrl, aspeed,g4-pinctrl: - -ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6 -ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT EXTRST FLACK FLBUSY FLWP GPID GPID0 GPID2 -GPID4 GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 -I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCRST LPCSMI MAC1LINK MAC2LINK MDIO1 -MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1 NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4 -NDTR1 NDTR2 NDTR3 NDTR4 NDTS4 NRI1 NRI2 NRI3 NRI4 NRTS1 NRTS2 NRTS3 OSCCLK PWM0 -PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8 ROMCS1 -ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1 SD2 SGPMCK -SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI SIOPBO SIOPWREQ -SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU SPICS1 TIMER3 TIMER4 -TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USB11D1 USB11H2 USB2D1 -USB2H1 USBCKI VGABIOS_ROM VGAHS VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1 -WDTRST2 - -aspeed,ast2500-pinctrl, aspeed,g5-pinctrl: - -ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6 -ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT ESPI FWSPICS1 FWSPICS2 GPID0 GPID2 GPID4 -GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 -I2C7 I2C8 I2C9 LAD0 LAD1 LAD2 LAD3 LCLK LFRAME LPCHC LPCPD LPCPLUS LPCPME -LPCRST LPCSMI LSIRQ MAC1LINK MAC2LINK MDIO1 MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1 -NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4 NDTR1 NDTR2 NDTR3 NDTR4 NRI1 NRI2 -NRI3 NRI4 NRTS1 NRTS2 NRTS3 NRTS4 OSCCLK PEWAKE PNOR PWM0 PWM1 PWM2 PWM3 PWM4 -PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 RXD1 RXD2 RXD3 RXD4 SALT1 SALT10 -SALT11 SALT12 SALT13 SALT14 SALT2 SALT3 SALT4 SALT5 SALT6 SALT7 SALT8 SALT9 -SCL1 SCL2 SD1 SD2 SDA1 SDA2 SGPM SGPS1 SGPS2 SIOONCTRL SIOPBI SIOPBO SIOPWREQ -SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1CS1 SPI1DEBUG SPI1PASSTHRU SPI2CK SPI2CS0 -SPI2CS1 SPI2MISO SPI2MOSI TIMER3 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 -TXD3 TXD4 UART6 USB11BHID USB2AD USB2AH USB2BD USB2BH USBCKI VGABIOSROM VGAHS -VGAVS VPI24 VPO WDTRST1 WDTRST2 - -Examples -======== - -g4 Example ----------- - -syscon: scu@1e6e2000 { - compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; - reg = <0x1e6e2000 0x1a8>; - - pinctrl: pinctrl { - compatible = "aspeed,g4-pinctrl"; - - pinctrl_i2c3_default: i2c3_default { - function = "I2C3"; - groups = "I2C3"; - }; - - pinctrl_gpioh0_unbiased_default: gpioh0 { - pins = "A8"; - bias-disable; - }; - }; -}; - -g5 Example ----------- - -ahb { - apb { - syscon: scu@1e6e2000 { - compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd"; - reg = <0x1e6e2000 0x1a8>; - - pinctrl: pinctrl { - compatible = "aspeed,g5-pinctrl"; - aspeed,external-nodes = <&gfx &lhc>; - - pinctrl_i2c3_default: i2c3_default { - function = "I2C3"; - groups = "I2C3"; - }; - - pinctrl_gpioh0_unbiased_default: gpioh0 { - pins = "A18"; - bias-disable; - }; - }; - }; - - gfx: display@1e6e6000 { - compatible = "aspeed,ast2500-gfx", "syscon"; - reg = <0x1e6e6000 0x1000>; - }; - }; - - lpc: lpc@1e789000 { - compatible = "aspeed,ast2500-lpc", "simple-mfd"; - reg = <0x1e789000 0x1000>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x1e789000 0x1000>; - - lpc_host: lpc-host@80 { - compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; - reg = <0x80 0x1e0>; - reg-io-width = <4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80 0x1e0>; - - lhc: lhc@20 { - compatible = "aspeed,ast2500-lhc"; - reg = <0x20 0x24 0x48 0x8>; - }; - }; - }; -};