From: Heinrich Schuchardt Date: Wed, 17 Aug 2022 13:25:21 +0000 (+0200) Subject: riscv: dts: microchip: correct L2 cache interrupts X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=34fc9cc3aebe8b9e27d3bc821543dd482dc686ca;p=linux.git riscv: dts: microchip: correct L2 cache interrupts The "PolarFire SoC MSS Technical Reference Manual" documents the following PLIC interrupts: 1 - L2 Cache Controller Signals when a metadata correction event occurs 2 - L2 Cache Controller Signals when an uncorrectable metadata event occurs 3 - L2 Cache Controller Signals when a data correction event occurs 4 - L2 Cache Controller Signals when an uncorrectable data event occurs This differs from the SiFive FU540 which only has three L2 cache related interrupts. The sequence in the device tree is defined by an enum: enum {         DIR_CORR = 0,         DATA_CORR,         DATA_UNCORR,         DIR_UNCORR, }; So the correct sequence of the L2 cache interrupts is interrupts = <1>, <3>, <4>, <2>; [Conor] This manifests as an unusable system if the l2-cache driver is enabled, as the wrong interrupt gets cleared & the handler prints errors to the console ad infinitum. Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board") CC: stable@vger.kernel.org # 5.15: e35b07a7df9b: riscv: dts: microchip: mpfs: Group tuples in interrupt properties Signed-off-by: Heinrich Schuchardt Signed-off-by: Conor Dooley --- diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi index 499c2e63ad35e..0a6ad5b9ff8dd 100644 --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi @@ -193,7 +193,7 @@ cache-size = <2097152>; cache-unified; interrupt-parent = <&plic>; - interrupts = <1>, <2>, <3>; + interrupts = <1>, <3>, <4>, <2>; }; clint: clint@2000000 {