From: Masaharu Hayakawa Date: Wed, 23 Dec 2020 07:30:21 +0000 (+0900) Subject: mmc: tmio: Add data timeout error detection X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=35cdcd1268f654f55e2308767349c44bd25d8009;p=linux.git mmc: tmio: Add data timeout error detection Currently, busy timeout is not checked for data transfer command. But, if the temperature condition changes, the data cannot be acquired correctly and timeout may occur. Also, we could reproduce an issue by using mmc_test driver (e.g. "Correct xfer_size at write (start failure)"). Therefore, this adds timeout error check. Signed-off-by: Masaharu Hayakawa [saito: rework commit message.] Signed-off-by: Takeshi Saito [shimoda: rebase, add commit description] Signed-off-by: Yoshihiro Shimoda Reviewed-by: Wolfram Sang Tested-by: Wolfram Sang Link: https://lore.kernel.org/r/1608708622-29668-2-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Ulf Hansson --- diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index 942b8375179c9..21492b56b2532 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -477,8 +477,10 @@ static void tmio_mmc_data_irq(struct tmio_mmc_host *host, unsigned int stat) if (!data) goto out; - if (stat & TMIO_STAT_CRCFAIL || stat & TMIO_STAT_STOPBIT_ERR || - stat & TMIO_STAT_TXUNDERRUN) + if (stat & TMIO_STAT_DATATIMEOUT) + data->error = -ETIMEDOUT; + else if (stat & TMIO_STAT_CRCFAIL || stat & TMIO_STAT_STOPBIT_ERR || + stat & TMIO_STAT_TXUNDERRUN) data->error = -EILSEQ; if (host->dma_on && (data->flags & MMC_DATA_WRITE)) { u32 status = sd_ctrl_read16_and_16_as_32(host, CTL_STATUS);