From: Marek Vasut Date: Wed, 21 Jul 2021 18:12:53 +0000 (+0200) Subject: ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=36862c1ebc92a7e6fcc55002965c44b8ad17d4ca;p=linux.git ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM The LAN8710 Energy Detect Power Down (EDPD) functionality might cause unreliable cable detection. There are multiple accounts of this in the SMSC PHY driver patches which attempted to make EDPD reliable, however it seems there is always some sort of corner case left. Unfortunatelly, there is no errata documented which would confirm this to be a silicon bug on the LAN87xx series of PHYs (LAN8700, LAN8710, LAN8720 at least). Disable EDPD on the DHCOM SoM, just like multiple other boards already do as well, to make the cable detection reliable. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index 8349c9099e301..8c41f819f7769 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -140,6 +140,7 @@ reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; reset-assert-us = <500>; reset-deassert-us = <500>; + smsc,disable-energy-detect; interrupt-parent = <&gpioi>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; };