From: Dmitry Baryshkov Date: Fri, 30 Sep 2022 18:52:18 +0000 (+0300) Subject: ARM: dts: qcom: apq8064-ifc6410: pull SDCC pwrseq node up one level X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=36e9b3420768e2c883eaa443de53df167c589922;p=linux.git ARM: dts: qcom: apq8064-ifc6410: pull SDCC pwrseq node up one level There are no need to add additional simple-bus nodes just to populate a single pwrseq device. Pull it up one level into /. While we are at it also fix node name replacing underscore with dash. Signed-off-by: Dmitry Baryshkov Reviewed-by: Neil Armstrong Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220930185236.867655-6-dmitry.baryshkov@linaro.org --- diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 610fb8d652c37..96307550523aa 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -22,17 +22,6 @@ stdout-path = "serial0:115200n8"; }; - pwrseq { - compatible = "simple-bus"; - - sdcc4_pwrseq: sdcc4_pwrseq { - pinctrl-names = "default"; - pinctrl-0 = <&wlan_default_gpios>; - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -57,6 +46,13 @@ }; }; + sdcc4_pwrseq: pwrseq-sdcc4 { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; + }; + ext_3p3v: regulator-ext-3p3v { compatible = "regulator-fixed"; regulator-min-microvolt = <3300000>;