From: Konrad Dybcio <konrad.dybcio@linaro.org>
Date: Tue, 2 Jan 2024 13:34:14 +0000 (+0100)
Subject: arm64: dts: qcom: sm8450: Hook up GPU cooling device
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=36fd56ab4d1d13adb9ced8592dc51e009240442d;p=linux.git

arm64: dts: qcom: sm8450: Hook up GPU cooling device

In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, update the trip point label
to be more telling, while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-topic-gpu_cooling-v1-10-fda30c57e353@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
---

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index ec5c02171af67..f37bacc65ef8e 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2038,6 +2038,7 @@
 			operating-points-v2 = <&gpu_opp_table>;
 
 			qcom,gmu = <&gmu>;
+			#cooling-cells = <2>;
 
 			status = "disabled";
 
@@ -4892,6 +4893,13 @@
 			polling-delay = <0>;
 			thermal-sensors = <&tsens0 14>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_top_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
 				thermal-engine-config {
 					temperature = <125000>;
@@ -4911,7 +4919,7 @@
 					type = "passive";
 				};
 
-				gpu0_tj_cfg: tj-cfg {
+				gpu_top_alert0: trip-point0 {
 					temperature = <95000>;
 					hysteresis = <5000>;
 					type = "passive";
@@ -4924,6 +4932,13 @@
 			polling-delay = <0>;
 			thermal-sensors = <&tsens0 15>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_bottom_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
 				thermal-engine-config {
 					temperature = <125000>;
@@ -4943,7 +4958,7 @@
 					type = "passive";
 				};
 
-				gpu1_tj_cfg: tj-cfg {
+				gpu_bottom_alert0: trip-point0 {
 					temperature = <95000>;
 					hysteresis = <5000>;
 					type = "passive";