From: Marek Vasut <marex@denx.de>
Date: Thu, 31 Aug 2023 19:55:09 +0000 (+0200)
Subject: arm64: dts: imx8mp: Simplify USB C on DH i.MX8M Plus DHCOM PDK3
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=3baf264bcdcd8c498807c65bf7bd271f399e6ea9;p=linux.git

arm64: dts: imx8mp: Simplify USB C on DH i.MX8M Plus DHCOM PDK3

Remove the connector as well as all the links and only connect the
PTN5150 with xHCI controller. This is sufficient to implement the
role switching.

Furthermore, this makes resume work without hanging. Without this
patch, the platform would hang on resume of 'connector'.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
index 31d85d5871c91..0156c5c1b600b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
@@ -35,33 +35,6 @@
 		clock-frequency = <25000000>;
 	};
 
-	connector {
-		compatible = "usb-c-connector";
-		label = "USB-C";
-		data-role = "dual";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				usb_c_0_hs_ep: endpoint {
-					remote-endpoint = <&dwc3_0_hs_ep>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				usb_c_0_ss_ep: endpoint {
-					remote-endpoint = <&ptn5150_in_ep>;
-				};
-			};
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -202,24 +175,10 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ptn5150>;
 
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-
-						ptn5150_in_ep: endpoint {
-							remote-endpoint = <&usb_c_0_ss_ep>;
-						};
-					};
-
-					port@1 {
-						reg = <1>;
+				port {
 
-						ptn5150_out_ep: endpoint {
-							remote-endpoint = <&dwc3_0_ss_ep>;
-						};
+					ptn5150_out_ep: endpoint {
+						remote-endpoint = <&dwc3_0_ep>;
 					};
 				};
 			};
@@ -310,16 +269,7 @@
 	usb-role-switch;
 
 	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dwc3_0_hs_ep: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&usb_c_0_hs_ep>;
-		};
-
-		dwc3_0_ss_ep: endpoint@1 {
-			reg = <1>;
+		dwc3_0_ep: endpoint {
 			remote-endpoint = <&ptn5150_out_ep>;
 		};
 	};