From: Douglas Anderson <dianders@chromium.org>
Date: Tue, 5 Mar 2024 01:49:53 +0000 (-0800)
Subject: Revert "tty: serial: simplify qcom_geni_serial_send_chunk_fifo()"
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=3d9319c27ceb35fa3d2c8b15508967f3fc7e5b78;p=linux.git

Revert "tty: serial: simplify qcom_geni_serial_send_chunk_fifo()"

This reverts commit 5c7e105cd156fc9adf5294a83623d7a40c15f9b9.

As identified by KASAN, the simplification done by the cleanup patch
was not legal.

>From tracing through the code, it can be seen that we're transmitting
from a 4096-byte circular buffer. We copy anywhere from 1-4 bytes from
it each time. The simplification runs into trouble when we get near
the end of the circular buffer. For instance, we might start out with
xmit->tail = 4094 and we want to transfer 4 bytes. With the code
before simplification this was no problem. We'd read buf[4094],
buf[4095], buf[0], and buf[1]. With the new code we'll do a
memcpy(&buf[4094], 4) which reads 2 bytes past the end of the buffer
and then skips transmitting what's at buf[0] and buf[1].

KASAN isn't 100% consistent at reporting this for me, but to be extra
confident in the analysis, I added traces of the tail and tx_bytes and
then wrote a test program:

  while true; do
    echo -n "abcdefghijklmnopqrstuvwxyz0" > /dev/ttyMSM0
    sleep .1
  done

I watched the traces over SSH and saw:
  qcom_geni_serial_send_chunk_fifo: 4093 4
  qcom_geni_serial_send_chunk_fifo: 1 3

Which indicated that one byte should be missing. Sure enough the
output that should have been:

  abcdefghijklmnopqrstuvwxyz0

In one case was actually missing a byte:

  abcdefghijklmnopqrstuvwyz0

Running "ls -al" on large directories also made the missing bytes
obvious since columns didn't line up.

While the original code may not be the most elegant, we only talking
about copying up to 4 bytes here. Let's just go back to the code that
worked.

Fixes: 5c7e105cd156 ("tty: serial: simplify qcom_geni_serial_send_chunk_fifo()")
Cc: stable <stable@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240304174952.1.I920a314049b345efd1f69d708e7f74d2213d0b49@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index e63a8fbe63bdb..99e08737f293c 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -851,19 +851,21 @@ static void qcom_geni_serial_stop_tx(struct uart_port *uport)
 }
 
 static void qcom_geni_serial_send_chunk_fifo(struct uart_port *uport,
-					     unsigned int remaining)
+					     unsigned int chunk)
 {
 	struct qcom_geni_serial_port *port = to_dev_port(uport);
 	struct circ_buf *xmit = &uport->state->xmit;
-	unsigned int tx_bytes;
+	unsigned int tx_bytes, c, remaining = chunk;
 	u8 buf[BYTES_PER_FIFO_WORD];
 
 	while (remaining) {
 		memset(buf, 0, sizeof(buf));
 		tx_bytes = min(remaining, BYTES_PER_FIFO_WORD);
 
-		memcpy(buf, &xmit->buf[xmit->tail], tx_bytes);
-		uart_xmit_advance(uport, tx_bytes);
+		for (c = 0; c < tx_bytes ; c++) {
+			buf[c] = xmit->buf[xmit->tail];
+			uart_xmit_advance(uport, 1);
+		}
 
 		iowrite32_rep(uport->membase + SE_GENI_TX_FIFOn, buf, 1);