From: Tero Kristo <t-kristo@ti.com>
Date: Wed, 16 Mar 2016 19:54:56 +0000 (+0200)
Subject: clk: ti: amx3xx: limit the maximum frequency of DPLLs based on spec
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=3db5ca27c80c15d20d0f1152dc34a5bcfa432ae6;p=linux.git

clk: ti: amx3xx: limit the maximum frequency of DPLLs based on spec

AM33xx/AM43xx devices use the same DPLL IP blocks, which only support
maximum rate of 1GHz [1] for the default and 2GHz for the low-jitter type
DPLLs [2]. Reflect this limitation in the DPLL init code by adding the
max-rate parameter based on the DPLL types.

[1] Functional, integration & test specification for GS70 ADPLLS, Rev 1.0-01
[2] Functional, integration & test specification for GS70 ADPLLLJ, Rev 0.8-02

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---

diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
index 3bc9959f71c39..9fc8754a6e616 100644
--- a/drivers/clk/ti/dpll.c
+++ b/drivers/clk/ti/dpll.c
@@ -655,6 +655,7 @@ static void __init of_ti_am3_no_gate_dpll_setup(struct device_node *node)
 		.max_multiplier = 2047,
 		.max_divider = 128,
 		.min_divider = 1,
+		.max_rate = 1000000000,
 		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
 	};
 
@@ -674,6 +675,7 @@ static void __init of_ti_am3_jtype_dpll_setup(struct device_node *node)
 		.max_divider = 256,
 		.min_divider = 2,
 		.flags = DPLL_J_TYPE,
+		.max_rate = 2000000000,
 		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
 	};
 
@@ -692,6 +694,7 @@ static void __init of_ti_am3_no_gate_jtype_dpll_setup(struct device_node *node)
 		.max_multiplier = 2047,
 		.max_divider = 128,
 		.min_divider = 1,
+		.max_rate = 2000000000,
 		.flags = DPLL_J_TYPE,
 		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
 	};
@@ -712,6 +715,7 @@ static void __init of_ti_am3_dpll_setup(struct device_node *node)
 		.max_multiplier = 2047,
 		.max_divider = 128,
 		.min_divider = 1,
+		.max_rate = 1000000000,
 		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
 	};
 
@@ -729,6 +733,7 @@ static void __init of_ti_am3_core_dpll_setup(struct device_node *node)
 		.max_multiplier = 2047,
 		.max_divider = 128,
 		.min_divider = 1,
+		.max_rate = 1000000000,
 		.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
 	};