From: Krzysztof Adamski Date: Thu, 14 Oct 2021 13:01:28 +0000 (+0200) Subject: hwmon: (tmp421) support specifying n-factor via DT X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=3fba10dc0341462a907c2eb31e1dc60b83da23fa;p=linux.git hwmon: (tmp421) support specifying n-factor via DT Previous patches added a way to specify some channel specific parameters in DT and n-factor is definitely one of them. This calibration mechanism is board specific as its value depends on the diodes/transistors being connected to the sensor and thus the DT seems like a right fit for that information. It is very similar to the value of shunt resistor that some drivers allows specifying in DT. This patch adds a possibility to set n-factor for each channel via "n-factor" DT property in each channel subnode. Signed-off-by: Krzysztof Adamski Link: https://lore.kernel.org/r/69d0bfcc5ba27c67f21d3eabfb100656a14c75b9.1634206677.git.krzysztof.adamski@nokia.com Signed-off-by: Guenter Roeck --- diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c index af08bc985a130..4f3737d14ade5 100644 --- a/drivers/hwmon/tmp421.c +++ b/drivers/hwmon/tmp421.c @@ -34,6 +34,7 @@ enum chips { tmp421, tmp422, tmp423, tmp441, tmp442 }; #define TMP421_STATUS_REG 0x08 #define TMP421_CONFIG_REG_1 0x09 #define TMP421_CONVERSION_RATE_REG 0x0B +#define TMP421_N_FACTOR_REG_1 0x21 #define TMP421_MANUFACTURER_ID_REG 0xFE #define TMP421_DEVICE_ID_REG 0xFF @@ -310,6 +311,7 @@ static int tmp421_probe_child_from_dt(struct i2c_client *client, { struct device *dev = &client->dev; u32 i; + s32 val; int err; err = of_property_read_u32(child, "reg", &i); @@ -329,6 +331,22 @@ static int tmp421_probe_child_from_dt(struct i2c_client *client, data->channel[i].enabled = of_device_is_available(child); + err = of_property_read_s32(child, "ti,n-factor", &val); + if (!err) { + if (i == 0) { + dev_err(dev, "n-factor can't be set for internal channel\n"); + return -EINVAL; + } + + if (val > 127 || val < -128) { + dev_err(dev, "n-factor for channel %d invalid (%d)\n", + i, val); + return -EINVAL; + } + i2c_smbus_write_byte_data(client, TMP421_N_FACTOR_REG_1 + i - 1, + val); + } + return 0; }