From: Vadym Kochan Date: Wed, 16 Sep 2020 16:31:02 +0000 (+0300) Subject: dt-bindings: marvell,prestera: Add description for device-tree bindings X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=40acc05271abc2852c32622edbebd75698736b9b;p=linux.git dt-bindings: marvell,prestera: Add description for device-tree bindings Add brief description how to configure base mac address binding in device-tree. Describe requirement for the PCI port which is connected to the ASIC, to allow access to the firmware related registers. Signed-off-by: Vadym Kochan Signed-off-by: David S. Miller --- diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt index 83370ebf5b895..e28938ddfdf5c 100644 --- a/Documentation/devicetree/bindings/net/marvell,prestera.txt +++ b/Documentation/devicetree/bindings/net/marvell,prestera.txt @@ -45,3 +45,37 @@ dfx-server { ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>; reg = ; }; + +Marvell Prestera SwitchDev bindings +----------------------------------- +Optional properties: +- compatible: must be "marvell,prestera" +- base-mac-provider: describes handle to node which provides base mac address, + might be a static base mac address or nvme cell provider. + +Example: + +eeprom_mac_addr: eeprom-mac-addr { + compatible = "eeprom,mac-addr-cell"; + status = "okay"; + + nvmem = <&eeprom_at24>; +}; + +prestera { + compatible = "marvell,prestera"; + status = "okay"; + + base-mac-provider = <&eeprom_mac_addr>; +}; + +The current implementation of Prestera Switchdev PCI interface driver requires +that BAR2 is assigned to 0xf6000000 as base address from the PCI IO range: + +&cp0_pcie0 { + ranges = <0x81000000 0x0 0xfb000000 0x0 0xfb000000 0x0 0xf0000 + 0x82000000 0x0 0xf6000000 0x0 0xf6000000 0x0 0x2000000 + 0x82000000 0x0 0xf9000000 0x0 0xf9000000 0x0 0x100000>; + phys = <&cp0_comphy0 0>; + status = "okay"; +};