From: Eyal Ilsar Date: Thu, 16 Nov 2017 08:01:26 +0000 (+0200) Subject: wcn36xx: set default BTLE coexistence config X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=4119b6160a35693655199f3e9e4a4d7b154a75b0;p=linux.git wcn36xx: set default BTLE coexistence config If the value for the firmware configuration parameters BTC_STATIC_LEN_LE_BT and BTC_STATIC_LEN_LE_WLAN are not set the duty cycle between BT and WLAN is such that if BT (including BLE) is active WLAN gets 0 bandwidth. When tuning these parameters having a too high value for WLAN means that BLE performance degrades. The "sweet" point of roughly half of the maximal values was empirically found to achieve a balance between BLE and Wi-Fi coexistence performance. Signed-off-by: Eyal Ilsar Signed-off-by: Ramon Fried Acked-by: Bjorn Andersson Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c index 9c6590d5348ad..6f1e741acf3ec 100644 --- a/drivers/net/wireless/ath/wcn36xx/smd.c +++ b/drivers/net/wireless/ath/wcn36xx/smd.c @@ -73,6 +73,8 @@ static struct wcn36xx_cfg_val wcn36xx_cfg_vals[] = { WCN36XX_CFG_VAL(TX_PWR_CTRL_ENABLE, 1), WCN36XX_CFG_VAL(ENABLE_CLOSE_LOOP, 1), WCN36XX_CFG_VAL(ENABLE_LPWR_IMG_TRANSITION, 0), + WCN36XX_CFG_VAL(BTC_STATIC_LEN_LE_BT, 120000), + WCN36XX_CFG_VAL(BTC_STATIC_LEN_LE_WLAN, 30000), WCN36XX_CFG_VAL(MAX_ASSOC_LIMIT, 10), WCN36XX_CFG_VAL(ENABLE_MCC_ADAPTIVE_SCHEDULER, 0), };