From: Shin'ichiro Kawasaki Date: Tue, 15 Nov 2022 00:29:05 +0000 (+0900) Subject: scsi: sd: Use 16-byte SYNCHRONIZE CACHE on ZBC devices X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=42c5907728867df91045f532a38682e0ec7a955b;p=linux.git scsi: sd: Use 16-byte SYNCHRONIZE CACHE on ZBC devices ZBC Zoned Block Commands specification mandates SYNCHRONIZE CACHE(16) for host-managed zoned block devices, but does not mandate SYNCHRONIZE CACHE(10). Call SYNCHRONIZE CACHE(16) in place of SYNCHRONIZE CACHE(10) to ensure that the command is always supported. For this purpose, add use_16_for_sync flag to struct scsi_device in same manner as use_16_for_rw flag. To be precise, ZBC does not mandate SYNCHRONIZE CACHE(16) for host-aware zoned block devices. However, modern devices should support 16-byte commands. Hence, call SYNCHRONIZE CACHE (16) on both types of ZBC devices, host-aware and host-managed. Of note is that READ(16) and WRITE(16) have same story and they are already called for both types of ZBC devices. Another note is that this patch depends on the fix commit ea045fd344cb ("ata: libata-scsi: fix SYNCHRONIZE CACHE (16) command failure"). Signed-off-by: Shin'ichiro Kawasaki Link: https://lore.kernel.org/r/20221115002905.1709006-1-shinichiro.kawasaki@wdc.com Reviewed-by: Damien Le Moal Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index eb76ba0550216..faa2b55d1a21a 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1026,8 +1026,13 @@ static blk_status_t sd_setup_flush_cmnd(struct scsi_cmnd *cmd) /* flush requests don't perform I/O, zero the S/G table */ memset(&cmd->sdb, 0, sizeof(cmd->sdb)); - cmd->cmnd[0] = SYNCHRONIZE_CACHE; - cmd->cmd_len = 10; + if (cmd->device->use_16_for_sync) { + cmd->cmnd[0] = SYNCHRONIZE_CACHE_16; + cmd->cmd_len = 16; + } else { + cmd->cmnd[0] = SYNCHRONIZE_CACHE; + cmd->cmd_len = 10; + } cmd->transfersize = 0; cmd->allowed = sdkp->max_retries; @@ -1587,9 +1592,12 @@ static int sd_sync_cache(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr) sshdr = &my_sshdr; for (retries = 3; retries > 0; --retries) { - unsigned char cmd[10] = { 0 }; + unsigned char cmd[16] = { 0 }; - cmd[0] = SYNCHRONIZE_CACHE; + if (sdp->use_16_for_sync) + cmd[0] = SYNCHRONIZE_CACHE_16; + else + cmd[0] = SYNCHRONIZE_CACHE; /* * Leave the rest of the command zero to indicate * flush everything. diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c index bd15624c63228..b163bf936acc7 100644 --- a/drivers/scsi/sd_zbc.c +++ b/drivers/scsi/sd_zbc.c @@ -921,9 +921,10 @@ int sd_zbc_read_zones(struct scsi_disk *sdkp, u8 buf[SD_BUF_SIZE]) return 0; } - /* READ16/WRITE16 is mandatory for ZBC disks */ + /* READ16/WRITE16/SYNC16 is mandatory for ZBC devices */ sdkp->device->use_16_for_rw = 1; sdkp->device->use_10_for_rw = 0; + sdkp->device->use_16_for_sync = 1; if (!blk_queue_is_zoned(q)) { /* diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 24bdbf7999ab4..3642b8e3928b7 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -184,6 +184,7 @@ struct scsi_device { unsigned no_report_opcodes:1; /* no REPORT SUPPORTED OPERATION CODES */ unsigned no_write_same:1; /* no WRITE SAME command */ unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */ + unsigned use_16_for_sync:1; /* Use sync (16) over sync (10) */ unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */ unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */ unsigned skip_vpd_pages:1; /* do not read VPD pages */