From: Simon Horman <horms+renesas@verge.net.au>
Date: Wed, 13 Mar 2019 10:58:16 +0000 (+0100)
Subject: arm64: dts: renesas: ebisu: Add PMIC DDR0 Backup Power config
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=474706117c2baa68bf053f16cd35618d30bf4c06;p=linux.git

arm64: dts: renesas: ebisu: Add PMIC DDR0 Backup Power config

On Ebisu the DDR0 power rail needs to be kept powered when backup mode is
enabled.  Reflect this in the "rohm,ddr-backup-power" property for the
BD9571MWV PMIC node.

The accessory power switch (SW23) is a toggle switch, hence specify
"rohm,rstbmode-level".

Based on advice from Geert Uytterhoeven.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
---

diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 18a99d2e1ea5a..0e873ccfd9e5e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -466,6 +466,8 @@
 		#interrupt-cells = <2>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		rohm,ddr-backup-power = <0x1>;
+		rohm,rstbmode-level;
 	};
 };