From: Sakari Ailus Date: Mon, 22 Jun 2020 10:37:45 +0000 (+0200) Subject: media: ccs-pll: Differentiate between CSI-2 D-PHY and C-PHY X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=47b6eaf36eba143860cf4e772a1108b1ef05520d;p=linux.git media: ccs-pll: Differentiate between CSI-2 D-PHY and C-PHY Differentiate between CSI-2 D-PHY and C-PHY. This does not yet include support for C-PHY. Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/i2c/ccs-pll.c b/drivers/media/i2c/ccs-pll.c index da97a2b917171..c6435ed0597ed 100644 --- a/drivers/media/i2c/ccs-pll.c +++ b/drivers/media/i2c/ccs-pll.c @@ -430,7 +430,7 @@ int ccs_pll_calculate(struct device *dev, const struct ccs_pll_limits *lim, pll->binning_vertical); switch (pll->bus_type) { - case CCS_PLL_BUS_TYPE_CSI2: + case CCS_PLL_BUS_TYPE_CSI2_DPHY: /* CSI transfers 2 bits per clock per lane; thus times 2 */ op_pll_fr->pll_op_clk_freq_hz = pll->link_freq * 2 * (pll->csi2.lanes / lane_op_clock_ratio); diff --git a/drivers/media/i2c/ccs-pll.h b/drivers/media/i2c/ccs-pll.h index 578c9272688a6..d06a80c4fc52b 100644 --- a/drivers/media/i2c/ccs-pll.h +++ b/drivers/media/i2c/ccs-pll.h @@ -13,7 +13,8 @@ #define CCS_PLL_H /* CSI-2 or CCP-2 */ -#define CCS_PLL_BUS_TYPE_CSI2 0x00 +#define CCS_PLL_BUS_TYPE_CSI2_DPHY 0x00 +#define CCS_PLL_BUS_TYPE_CSI2_CPHY 0x01 /* op pix clock is for all lanes in total normally */ #define CCS_PLL_FLAG_OP_PIX_CLOCK_PER_LANE (1 << 0) diff --git a/drivers/media/i2c/ccs/ccs-core.c b/drivers/media/i2c/ccs/ccs-core.c index dbb31d2001fbb..a422a523057e4 100644 --- a/drivers/media/i2c/ccs/ccs-core.c +++ b/drivers/media/i2c/ccs/ccs-core.c @@ -3200,7 +3200,7 @@ static int ccs_probe(struct i2c_client *client) sensor->scale_m = CCS_LIM(sensor, SCALER_N_MIN); /* prepare PLL configuration input values */ - sensor->pll.bus_type = CCS_PLL_BUS_TYPE_CSI2; + sensor->pll.bus_type = CCS_PLL_BUS_TYPE_CSI2_DPHY; sensor->pll.csi2.lanes = sensor->hwcfg.lanes; sensor->pll.ext_clk_freq_hz = sensor->hwcfg.ext_clk; sensor->pll.scale_n = CCS_LIM(sensor, SCALER_N_MIN);