From: Horatiu Vultur Date: Tue, 30 Aug 2022 06:40:55 +0000 (+0200) Subject: net: phy: micrel: Make the GPIO to be non-exclusive X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=4a4ce82212ef014d70f486a427005b2b5bab8e34;p=linux.git net: phy: micrel: Make the GPIO to be non-exclusive The same GPIO line can be shared by multiple phys for the coma mode pin. If that is the case then, all the other phys that share the same line will failed to be probed because the access to the gpio line is not non-exclusive. Fix this by making access to the gpio line to be nonexclusive using flag GPIOD_FLAGS_BIT_NONEXCLUSIVE. This allows all the other PHYs to be probed. Fixes: 738871b09250ee ("net: phy: micrel: add coma mode GPIO") Reviewed-by: Andrew Lunn Signed-off-by: Horatiu Vultur Link: https://lore.kernel.org/r/20220830064055.2340403-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski --- diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index e78d0bf69bc3e..6f52b4fb68885 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -2873,12 +2873,18 @@ static int lan8814_config_init(struct phy_device *phydev) return 0; } +/* It is expected that there will not be any 'lan8814_take_coma_mode' + * function called in suspend. Because the GPIO line can be shared, so if one of + * the phys goes back in coma mode, then all the other PHYs will go, which is + * wrong. + */ static int lan8814_release_coma_mode(struct phy_device *phydev) { struct gpio_desc *gpiod; gpiod = devm_gpiod_get_optional(&phydev->mdio.dev, "coma-mode", - GPIOD_OUT_HIGH_OPEN_DRAIN); + GPIOD_OUT_HIGH_OPEN_DRAIN | + GPIOD_FLAGS_BIT_NONEXCLUSIVE); if (IS_ERR(gpiod)) return PTR_ERR(gpiod);