From: Paul Cercueil Date: Sun, 4 Jun 2023 12:26:55 +0000 (+0200) Subject: MIPS: DTS: qi_lb60: Don't use unit address for regulators X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=4cdb5d9d39f010ba98e93e657f36c59a3cdf8730;p=linux.git MIPS: DTS: qi_lb60: Don't use unit address for regulators The regulators don't have any "reg" property, and therefore shouldn't use an unit address in their node names. Signed-off-by: Paul Cercueil Signed-off-by: Thomas Bogendoerfer --- diff --git a/arch/mips/boot/dts/ingenic/qi_lb60.dts b/arch/mips/boot/dts/ingenic/qi_lb60.dts index ba02189715723..24f987244a122 100644 --- a/arch/mips/boot/dts/ingenic/qi_lb60.dts +++ b/arch/mips/boot/dts/ingenic/qi_lb60.dts @@ -27,7 +27,7 @@ stdout-path = &uart0; }; - vcc: regulator@0 { + vcc: regulator-0 { compatible = "regulator-fixed"; regulator-name = "vcc"; @@ -36,7 +36,7 @@ regulator-always-on; }; - mmc_power: regulator@1 { + mmc_power: regulator-1 { compatible = "regulator-fixed"; regulator-name = "mmc_vcc"; gpio = <&gpd 2 0>; @@ -45,7 +45,7 @@ regulator-max-microvolt = <3300000>; }; - amp_supply: regulator@2 { + amp_supply: regulator-2 { compatible = "regulator-fixed"; regulator-name = "amp_supply"; gpio = <&gpd 4 0>;