From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: Tue, 30 May 2023 12:03:37 +0000 (+0200)
Subject: ARM: dts: imx6dl: Add trip points to thermal zones on several devices
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=543b2064b2f994bdc5d8de82c95f29a1417ee81c;p=linux.git

ARM: dts: imx6dl: Add trip points to thermal zones on several devices

Kernel v6.3-rc1 prints errors due to missing trip points in thermal
zones. These errors indicate a lack of critical temperature threshold
settings, causing warnings at boot. To silence these errors, this patch
introduces trip points into the thermal zones of several imx6dl based
devices.

The following devices are updated:
- plym2m
- prtvt7
- victgo
- vicut1

These devices are automotive grade and expected to operate up to 105C.
An exception is the plym2m, an industrial grade device, which is
certified to work up to 85C.

The added trip points act as alert thresholds but do not trigger any
actions except warnings. This behavior is by design, as these devices
should maintain their performance until the end, without any thermal
throttling.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts
index e3c10483f33bd..dfa8110b1d97b 100644
--- a/arch/arm/boot/dts/imx6dl-plym2m.dts
+++ b/arch/arm/boot/dts/imx6dl-plym2m.dts
@@ -113,18 +113,42 @@
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 
 		touch-thermal0 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp0>;
+
+			trips {
+				alert {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 
 		touch-thermal1 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp1>;
+
+			trips {
+				alert {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index 45bc6e3245f6a..568e98cb62aaf 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -246,18 +246,42 @@
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 
 		touch-thermal0 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 
 		touch-thermal1 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp1>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts
index 23274be08e61f..4875afadb6300 100644
--- a/arch/arm/boot/dts/imx6dl-victgo.dts
+++ b/arch/arm/boot/dts/imx6dl-victgo.dts
@@ -74,18 +74,42 @@
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 
 		touch-thermal0 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 
 		touch-thermal1 {
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&touch_temp1>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index 74017ae5a67a0..ca9c20e90bcf3 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -169,6 +169,14 @@
 			polling-delay = <20000>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&tsens0>;
+
+			trips {
+				alert {
+					temperature = <105000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+			};
 		};
 	};
 };