From: Bhagavathi Perumal S <bperumal@codeaurora.org>
Date: Tue, 17 Dec 2019 16:49:17 +0000 (+0100)
Subject: ath11k: set TxBf parameters after vdev start
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=5815719dd2714a369448159a562f6fdf75ffe87b;p=linux.git

ath11k: set TxBf parameters after vdev start

The channel info parameters are required by the firmware to process TxBf
parameters. Currently TxBf is passed prior to the channel info. This patch
moves TxBf setup after the channel setup.

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 0ed3e4d19f7a0..f9ab02e84d13d 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -4212,12 +4212,6 @@ static int ath11k_mac_op_add_interface(struct ieee80211_hw *hw,
 			    arvif->vdev_id, ret);
 	}
 
-	ret = ath11k_mac_set_txbf_conf(arvif);
-	if (ret) {
-		ath11k_warn(ar->ab, "failed to set txbf conf for vdev %d: %d\n",
-			    arvif->vdev_id, ret);
-	}
-
 	ath11k_dp_vdev_tx_attach(ar, arvif);
 
 	mutex_unlock(&ar->conf_mutex);
@@ -4567,6 +4561,11 @@ ath11k_mac_vdev_start_restart(struct ath11k_vif *arvif,
 			   arg.channel.freq, arg.vdev_id);
 	}
 
+	ret = ath11k_mac_set_txbf_conf(arvif);
+	if (ret)
+		ath11k_warn(ab, "failed to set txbf conf for vdev %d: %d\n",
+			    arvif->vdev_id, ret);
+
 	return 0;
 }