From: Brian Masney Date: Fri, 8 Feb 2019 02:16:29 +0000 (-0500) Subject: arm: dts: qcom: mdm9615: add interrupt controller properties X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=582648f5ef14383c66b26834b9a98ade8b4da74c;p=linux.git arm: dts: qcom: mdm9615: add interrupt controller properties Add interrupt controller properties now that ssbi-gpio is a proper hierarchical IRQ chip. The interrupts property is no longer needed so remove it. Note that the IRQs started at 24 instead of 192 like all of the other PMICs. This is the same IRQs as the MPP for this board. qcom-pm8xxx.c doesn't set the shared IRQs so this is highly likely to be a copy and paste error. Signed-off-by: Brian Masney Signed-off-by: Linus Walleij --- diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index c852b69229c97..0ed6fc3e873cd 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -323,13 +323,8 @@ pmicgpio: gpio@150 { compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; - interrupt-parent = <&pmicintc>; - interrupts = <24 IRQ_TYPE_NONE>, - <25 IRQ_TYPE_NONE>, - <26 IRQ_TYPE_NONE>, - <27 IRQ_TYPE_NONE>, - <28 IRQ_TYPE_NONE>, - <29 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; };