From: Thomas Haemmerle Date: Mon, 15 Apr 2024 10:50:30 +0000 (+0200) Subject: iio: pressure: dps310: simplify scale factor reading X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=5826711e841450755cae32bacc59f6465075db94;p=linux.git iio: pressure: dps310: simplify scale factor reading Both functions `dps310_get_pres_precision` and `dps310_get_temp_precision` provide the oversampling rate by calling the `BIT()` macro. However, to look up the corresponding scale factor, we need the register value itself. Currently, this is achieved by undoing the calculation of the oversampling rate with `ilog2()`. Simplify the two functions for getting the scale factor and directly use the register content for the lookup. Signed-off-by: Thomas Haemmerle Link: https://lore.kernel.org/r/20240415105030.1161770-5-thomas.haemmerle@leica-geosystems.com Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/pressure/dps310.c b/drivers/iio/pressure/dps310.c index c30623d96f0e4..7d882e15e5564 100644 --- a/drivers/iio/pressure/dps310.c +++ b/drivers/iio/pressure/dps310.c @@ -382,11 +382,11 @@ static int dps310_get_pres_k(struct dps310_data *data, int *val) { int reg_val, rc; - rc = dps310_get_pres_precision(data, ®_val); - if (rc) + rc = regmap_read(data->regmap, DPS310_PRS_CFG, ®_val); + if (rc < 0) return rc; - *val = scale_factors[ilog2(reg_val)]; + *val = scale_factors[reg_val & GENMASK(2, 0)]; return 0; } @@ -395,11 +395,11 @@ static int dps310_get_temp_k(struct dps310_data *data, int *val) { int reg_val, rc; - rc = dps310_get_temp_precision(data, ®_val); - if (rc) + rc = regmap_read(data->regmap, DPS310_TMP_CFG, ®_val); + if (rc < 0) return rc; - *val = scale_factors[ilog2(reg_val)]; + *val = scale_factors[reg_val & GENMASK(2, 0)]; return 0; }