From: Georgii Staroselskii Date: Fri, 1 Nov 2019 09:43:33 +0000 (+0300) Subject: arm64: dts: allwinner: bluetooth for Emlid Neutis N5 X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=5878524ee09d1d798cc4a870f517ff2ec450632c;p=linux.git arm64: dts: allwinner: bluetooth for Emlid Neutis N5 The Emlid Neutis N5 board has AP6212 BT+WiFi chip. This patch is in line with 8558c6e21ceb ("ARM: dts: sun8i: h3: bluetooth for Banana Pi M2 Zero board") and other commits that add Bluetooth support for similar boards. Signed-off-by: Georgii Staroselskii Signed-off-by: Maxime Ripard --- diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi index 82f4b44d525f5..5bec574fa1083 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi @@ -23,6 +23,8 @@ compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ post-power-on-delay-ms = <200>; + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -56,5 +58,16 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */ + device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + }; };