From: Bjorn Andersson <quic_bjorande@quicinc.com>
Date: Thu, 28 Mar 2024 02:01:13 +0000 (-0700)
Subject: arm64: dts: qcom: qcs6490-rb3gen2: Enable UFS
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=58dc9622d5de6ce0b80969b136e8e09a7645eca5;p=linux.git

arm64: dts: qcom: qcs6490-rb3gen2: Enable UFS

The rb3gen2 has UFS memory, adjust the necessary supply voltage and add
the controller and phy nodes to enable this.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240327-rb3gen2-ufs-v2-1-3de6b5dd78dd@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
---

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 3cc19ccff90cb..c98c41f8f3b1b 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -278,8 +278,8 @@
 
 		vreg_l7b_2p952: ldo7 {
 			regulator-name = "vreg_l7b_2p952";
-			regulator-min-microvolt = <2400000>;
-			regulator-max-microvolt = <3544000>;
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -293,8 +293,11 @@
 		vreg_l9b_1p2: ldo9 {
 			regulator-name = "vreg_l9b_1p2";
 			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1304000>;
+			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11b_1p504: ldo11 {
@@ -670,6 +673,25 @@
 	remote-endpoint = <&mdss_dp_out>;
 };
 
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l7b_2p952>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+	vccq2-supply = <&vreg_l9b_1p2>;
+	vccq2-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
 &wifi {
 	memory-region = <&wlan_fw_mem>;
 };