From: Corey Minyard Date: Tue, 18 May 2021 20:54:52 +0000 (-0500) Subject: adc: Move the max111x driver to the adc directory X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=58f3e3fe69a66a5c27675faf3e7afa52e027e621;p=qemu.git adc: Move the max111x driver to the adc directory It's an adc, put it where it belongs. Cc: Andrzej Zaborowski Cc: Peter Maydell Cc: qemu-arm@nongnu.org Signed-off-by: Corey Minyard Reviewed-by: Philippe Mathieu-Daudé Tested-by: Philippe Mathieu-Daudé --- diff --git a/MAINTAINERS b/MAINTAINERS index 455fdadfbb..2fde240be9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -844,8 +844,8 @@ F: hw/display/tc6393xb.c F: hw/gpio/max7310.c F: hw/gpio/zaurus.c F: hw/misc/mst_fpga.c -F: hw/misc/max111x.c -F: include/hw/misc/max111x.h +F: hw/adc/max111x.c +F: include/hw/adc/max111x.h F: include/hw/arm/pxa.h F: include/hw/arm/sharpsl.h F: include/hw/display/tc6393xb.h diff --git a/hw/adc/Kconfig b/hw/adc/Kconfig index 25d2229fb8..a825bd3d34 100644 --- a/hw/adc/Kconfig +++ b/hw/adc/Kconfig @@ -1,2 +1,5 @@ config STM32F2XX_ADC bool + +config MAX111X + bool diff --git a/hw/adc/max111x.c b/hw/adc/max111x.c new file mode 100644 index 0000000000..e8bf4cccd4 --- /dev/null +++ b/hw/adc/max111x.c @@ -0,0 +1,236 @@ +/* + * Maxim MAX1110/1111 ADC chip emulation. + * + * Copyright (c) 2006 Openedhand Ltd. + * Written by Andrzej Zaborowski + * + * This code is licensed under the GNU GPLv2. + * + * Contributions after 2012-01-13 are licensed under the terms of the + * GNU GPL, version 2 or (at your option) any later version. + */ + +#include "qemu/osdep.h" +#include "hw/adc/max111x.h" +#include "hw/irq.h" +#include "migration/vmstate.h" +#include "qemu/module.h" +#include "hw/qdev-properties.h" + +/* Control-byte bitfields */ +#define CB_PD0 (1 << 0) +#define CB_PD1 (1 << 1) +#define CB_SGL (1 << 2) +#define CB_UNI (1 << 3) +#define CB_SEL0 (1 << 4) +#define CB_SEL1 (1 << 5) +#define CB_SEL2 (1 << 6) +#define CB_START (1 << 7) + +#define CHANNEL_NUM(v, b0, b1, b2) \ + ((((v) >> (2 + (b0))) & 4) | \ + (((v) >> (3 + (b1))) & 2) | \ + (((v) >> (4 + (b2))) & 1)) + +static uint32_t max111x_read(MAX111xState *s) +{ + if (!s->tb1) + return 0; + + switch (s->cycle ++) { + case 1: + return s->rb2; + case 2: + return s->rb3; + } + + return 0; +} + +/* Interpret a control-byte */ +static void max111x_write(MAX111xState *s, uint32_t value) +{ + int measure, chan; + + /* Ignore the value if START bit is zero */ + if (!(value & CB_START)) + return; + + s->cycle = 0; + + if (!(value & CB_PD1)) { + s->tb1 = 0; + return; + } + + s->tb1 = value; + + if (s->inputs == 8) + chan = CHANNEL_NUM(value, 1, 0, 2); + else + chan = CHANNEL_NUM(value & ~CB_SEL0, 0, 1, 2); + + if (value & CB_SGL) + measure = s->input[chan] - s->com; + else + measure = s->input[chan] - s->input[chan ^ 1]; + + if (!(value & CB_UNI)) + measure ^= 0x80; + + s->rb2 = (measure >> 2) & 0x3f; + s->rb3 = (measure << 6) & 0xc0; + + /* FIXME: When should the IRQ be lowered? */ + qemu_irq_raise(s->interrupt); +} + +static uint32_t max111x_transfer(SSIPeripheral *dev, uint32_t value) +{ + MAX111xState *s = MAX_111X(dev); + max111x_write(s, value); + return max111x_read(s); +} + +static const VMStateDescription vmstate_max111x = { + .name = "max111x", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_SSI_PERIPHERAL(parent_obj, MAX111xState), + VMSTATE_UINT8(tb1, MAX111xState), + VMSTATE_UINT8(rb2, MAX111xState), + VMSTATE_UINT8(rb3, MAX111xState), + VMSTATE_INT32_EQUAL(inputs, MAX111xState, NULL), + VMSTATE_INT32(com, MAX111xState), + VMSTATE_ARRAY_INT32_UNSAFE(input, MAX111xState, inputs, + vmstate_info_uint8, uint8_t), + VMSTATE_END_OF_LIST() + } +}; + +static void max111x_input_set(void *opaque, int line, int value) +{ + MAX111xState *s = MAX_111X(opaque); + + assert(line >= 0 && line < s->inputs); + s->input[line] = value; +} + +static int max111x_init(SSIPeripheral *d, int inputs) +{ + DeviceState *dev = DEVICE(d); + MAX111xState *s = MAX_111X(dev); + + qdev_init_gpio_out(dev, &s->interrupt, 1); + qdev_init_gpio_in(dev, max111x_input_set, inputs); + + s->inputs = inputs; + + return 0; +} + +static void max1110_realize(SSIPeripheral *dev, Error **errp) +{ + max111x_init(dev, 8); +} + +static void max1111_realize(SSIPeripheral *dev, Error **errp) +{ + max111x_init(dev, 4); +} + +static void max111x_reset(DeviceState *dev) +{ + MAX111xState *s = MAX_111X(dev); + int i; + + for (i = 0; i < s->inputs; i++) { + s->input[i] = s->reset_input[i]; + } + s->com = 0; + s->tb1 = 0; + s->rb2 = 0; + s->rb3 = 0; + s->cycle = 0; +} + +static Property max1110_properties[] = { + /* Reset values for ADC inputs */ + DEFINE_PROP_UINT8("input0", MAX111xState, reset_input[0], 0xf0), + DEFINE_PROP_UINT8("input1", MAX111xState, reset_input[1], 0xe0), + DEFINE_PROP_UINT8("input2", MAX111xState, reset_input[2], 0xd0), + DEFINE_PROP_UINT8("input3", MAX111xState, reset_input[3], 0xc0), + DEFINE_PROP_END_OF_LIST(), +}; + +static Property max1111_properties[] = { + /* Reset values for ADC inputs */ + DEFINE_PROP_UINT8("input0", MAX111xState, reset_input[0], 0xf0), + DEFINE_PROP_UINT8("input1", MAX111xState, reset_input[1], 0xe0), + DEFINE_PROP_UINT8("input2", MAX111xState, reset_input[2], 0xd0), + DEFINE_PROP_UINT8("input3", MAX111xState, reset_input[3], 0xc0), + DEFINE_PROP_UINT8("input4", MAX111xState, reset_input[4], 0xb0), + DEFINE_PROP_UINT8("input5", MAX111xState, reset_input[5], 0xa0), + DEFINE_PROP_UINT8("input6", MAX111xState, reset_input[6], 0x90), + DEFINE_PROP_UINT8("input7", MAX111xState, reset_input[7], 0x80), + DEFINE_PROP_END_OF_LIST(), +}; + +static void max111x_class_init(ObjectClass *klass, void *data) +{ + SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + k->transfer = max111x_transfer; + dc->reset = max111x_reset; + dc->vmsd = &vmstate_max111x; + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static const TypeInfo max111x_info = { + .name = TYPE_MAX_111X, + .parent = TYPE_SSI_PERIPHERAL, + .instance_size = sizeof(MAX111xState), + .class_init = max111x_class_init, + .abstract = true, +}; + +static void max1110_class_init(ObjectClass *klass, void *data) +{ + SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + k->realize = max1110_realize; + device_class_set_props(dc, max1110_properties); +} + +static const TypeInfo max1110_info = { + .name = TYPE_MAX_1110, + .parent = TYPE_MAX_111X, + .class_init = max1110_class_init, +}; + +static void max1111_class_init(ObjectClass *klass, void *data) +{ + SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + k->realize = max1111_realize; + device_class_set_props(dc, max1111_properties); +} + +static const TypeInfo max1111_info = { + .name = TYPE_MAX_1111, + .parent = TYPE_MAX_111X, + .class_init = max1111_class_init, +}; + +static void max111x_register_types(void) +{ + type_register_static(&max111x_info); + type_register_static(&max1110_info); + type_register_static(&max1111_info); +} + +type_init(max111x_register_types) diff --git a/hw/adc/meson.build b/hw/adc/meson.build index 3d397b4ea1..ac4f093fea 100644 --- a/hw/adc/meson.build +++ b/hw/adc/meson.build @@ -1,3 +1,4 @@ softmmu_ss.add(when: 'CONFIG_STM32F2XX_ADC', if_true: files('stm32f2xx_adc.c')) softmmu_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_adc.c')) -softmmu_ss.add(when: 'CONFIG_ZYNQ', if_true: files('zynq-xadc.c')) \ No newline at end of file +softmmu_ss.add(when: 'CONFIG_ZYNQ', if_true: files('zynq-xadc.c')) +softmmu_ss.add(when: 'CONFIG_MAX111X', if_true: files('max111x.c')) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index b45a929cbd..0e2626125e 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -30,7 +30,7 @@ #include "audio/audio.h" #include "hw/boards.h" #include "hw/sysbus.h" -#include "hw/misc/max111x.h" +#include "hw/adc/max111x.h" #include "migration/vmstate.h" #include "exec/address-spaces.h" #include "cpu.h" diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index c71ed25820..996d45aff5 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -11,9 +11,6 @@ config ARMSSE_MHU config ARMSSE_CPU_PWRCTRL bool -config MAX111X - bool - config TMP105 bool depends on I2C diff --git a/hw/misc/max111x.c b/hw/misc/max111x.c deleted file mode 100644 index 1b3234a519..0000000000 --- a/hw/misc/max111x.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * Maxim MAX1110/1111 ADC chip emulation. - * - * Copyright (c) 2006 Openedhand Ltd. - * Written by Andrzej Zaborowski - * - * This code is licensed under the GNU GPLv2. - * - * Contributions after 2012-01-13 are licensed under the terms of the - * GNU GPL, version 2 or (at your option) any later version. - */ - -#include "qemu/osdep.h" -#include "hw/misc/max111x.h" -#include "hw/irq.h" -#include "migration/vmstate.h" -#include "qemu/module.h" -#include "hw/qdev-properties.h" - -/* Control-byte bitfields */ -#define CB_PD0 (1 << 0) -#define CB_PD1 (1 << 1) -#define CB_SGL (1 << 2) -#define CB_UNI (1 << 3) -#define CB_SEL0 (1 << 4) -#define CB_SEL1 (1 << 5) -#define CB_SEL2 (1 << 6) -#define CB_START (1 << 7) - -#define CHANNEL_NUM(v, b0, b1, b2) \ - ((((v) >> (2 + (b0))) & 4) | \ - (((v) >> (3 + (b1))) & 2) | \ - (((v) >> (4 + (b2))) & 1)) - -static uint32_t max111x_read(MAX111xState *s) -{ - if (!s->tb1) - return 0; - - switch (s->cycle ++) { - case 1: - return s->rb2; - case 2: - return s->rb3; - } - - return 0; -} - -/* Interpret a control-byte */ -static void max111x_write(MAX111xState *s, uint32_t value) -{ - int measure, chan; - - /* Ignore the value if START bit is zero */ - if (!(value & CB_START)) - return; - - s->cycle = 0; - - if (!(value & CB_PD1)) { - s->tb1 = 0; - return; - } - - s->tb1 = value; - - if (s->inputs == 8) - chan = CHANNEL_NUM(value, 1, 0, 2); - else - chan = CHANNEL_NUM(value & ~CB_SEL0, 0, 1, 2); - - if (value & CB_SGL) - measure = s->input[chan] - s->com; - else - measure = s->input[chan] - s->input[chan ^ 1]; - - if (!(value & CB_UNI)) - measure ^= 0x80; - - s->rb2 = (measure >> 2) & 0x3f; - s->rb3 = (measure << 6) & 0xc0; - - /* FIXME: When should the IRQ be lowered? */ - qemu_irq_raise(s->interrupt); -} - -static uint32_t max111x_transfer(SSIPeripheral *dev, uint32_t value) -{ - MAX111xState *s = MAX_111X(dev); - max111x_write(s, value); - return max111x_read(s); -} - -static const VMStateDescription vmstate_max111x = { - .name = "max111x", - .version_id = 1, - .minimum_version_id = 1, - .fields = (VMStateField[]) { - VMSTATE_SSI_PERIPHERAL(parent_obj, MAX111xState), - VMSTATE_UINT8(tb1, MAX111xState), - VMSTATE_UINT8(rb2, MAX111xState), - VMSTATE_UINT8(rb3, MAX111xState), - VMSTATE_INT32_EQUAL(inputs, MAX111xState, NULL), - VMSTATE_INT32(com, MAX111xState), - VMSTATE_ARRAY_INT32_UNSAFE(input, MAX111xState, inputs, - vmstate_info_uint8, uint8_t), - VMSTATE_END_OF_LIST() - } -}; - -static void max111x_input_set(void *opaque, int line, int value) -{ - MAX111xState *s = MAX_111X(opaque); - - assert(line >= 0 && line < s->inputs); - s->input[line] = value; -} - -static int max111x_init(SSIPeripheral *d, int inputs) -{ - DeviceState *dev = DEVICE(d); - MAX111xState *s = MAX_111X(dev); - - qdev_init_gpio_out(dev, &s->interrupt, 1); - qdev_init_gpio_in(dev, max111x_input_set, inputs); - - s->inputs = inputs; - - return 0; -} - -static void max1110_realize(SSIPeripheral *dev, Error **errp) -{ - max111x_init(dev, 8); -} - -static void max1111_realize(SSIPeripheral *dev, Error **errp) -{ - max111x_init(dev, 4); -} - -static void max111x_reset(DeviceState *dev) -{ - MAX111xState *s = MAX_111X(dev); - int i; - - for (i = 0; i < s->inputs; i++) { - s->input[i] = s->reset_input[i]; - } - s->com = 0; - s->tb1 = 0; - s->rb2 = 0; - s->rb3 = 0; - s->cycle = 0; -} - -static Property max1110_properties[] = { - /* Reset values for ADC inputs */ - DEFINE_PROP_UINT8("input0", MAX111xState, reset_input[0], 0xf0), - DEFINE_PROP_UINT8("input1", MAX111xState, reset_input[1], 0xe0), - DEFINE_PROP_UINT8("input2", MAX111xState, reset_input[2], 0xd0), - DEFINE_PROP_UINT8("input3", MAX111xState, reset_input[3], 0xc0), - DEFINE_PROP_END_OF_LIST(), -}; - -static Property max1111_properties[] = { - /* Reset values for ADC inputs */ - DEFINE_PROP_UINT8("input0", MAX111xState, reset_input[0], 0xf0), - DEFINE_PROP_UINT8("input1", MAX111xState, reset_input[1], 0xe0), - DEFINE_PROP_UINT8("input2", MAX111xState, reset_input[2], 0xd0), - DEFINE_PROP_UINT8("input3", MAX111xState, reset_input[3], 0xc0), - DEFINE_PROP_UINT8("input4", MAX111xState, reset_input[4], 0xb0), - DEFINE_PROP_UINT8("input5", MAX111xState, reset_input[5], 0xa0), - DEFINE_PROP_UINT8("input6", MAX111xState, reset_input[6], 0x90), - DEFINE_PROP_UINT8("input7", MAX111xState, reset_input[7], 0x80), - DEFINE_PROP_END_OF_LIST(), -}; - -static void max111x_class_init(ObjectClass *klass, void *data) -{ - SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass); - DeviceClass *dc = DEVICE_CLASS(klass); - - k->transfer = max111x_transfer; - dc->reset = max111x_reset; - dc->vmsd = &vmstate_max111x; - set_bit(DEVICE_CATEGORY_MISC, dc->categories); -} - -static const TypeInfo max111x_info = { - .name = TYPE_MAX_111X, - .parent = TYPE_SSI_PERIPHERAL, - .instance_size = sizeof(MAX111xState), - .class_init = max111x_class_init, - .abstract = true, -}; - -static void max1110_class_init(ObjectClass *klass, void *data) -{ - SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass); - DeviceClass *dc = DEVICE_CLASS(klass); - - k->realize = max1110_realize; - device_class_set_props(dc, max1110_properties); -} - -static const TypeInfo max1110_info = { - .name = TYPE_MAX_1110, - .parent = TYPE_MAX_111X, - .class_init = max1110_class_init, -}; - -static void max1111_class_init(ObjectClass *klass, void *data) -{ - SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass); - DeviceClass *dc = DEVICE_CLASS(klass); - - k->realize = max1111_realize; - device_class_set_props(dc, max1111_properties); -} - -static const TypeInfo max1111_info = { - .name = TYPE_MAX_1111, - .parent = TYPE_MAX_111X, - .class_init = max1111_class_init, -}; - -static void max111x_register_types(void) -{ - type_register_static(&max111x_info); - type_register_static(&max1110_info); - type_register_static(&max1111_info); -} - -type_init(max111x_register_types) diff --git a/hw/misc/meson.build b/hw/misc/meson.build index 508fce50c7..b0a8ee8994 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -3,7 +3,6 @@ softmmu_ss.add(when: 'CONFIG_EDU', if_true: files('edu.c')) softmmu_ss.add(when: 'CONFIG_FW_CFG_DMA', if_true: files('vmcoreinfo.c')) softmmu_ss.add(when: 'CONFIG_ISA_DEBUG', if_true: files('debugexit.c')) softmmu_ss.add(when: 'CONFIG_ISA_TESTDEV', if_true: files('pc-testdev.c')) -softmmu_ss.add(when: 'CONFIG_MAX111X', if_true: files('max111x.c')) softmmu_ss.add(when: 'CONFIG_PCA9552', if_true: files('pca9552.c')) softmmu_ss.add(when: 'CONFIG_PCI_TESTDEV', if_true: files('pci-testdev.c')) softmmu_ss.add(when: 'CONFIG_SGA', if_true: files('sga.c')) diff --git a/include/hw/adc/max111x.h b/include/hw/adc/max111x.h new file mode 100644 index 0000000000..beff59c815 --- /dev/null +++ b/include/hw/adc/max111x.h @@ -0,0 +1,56 @@ +/* + * Maxim MAX1110/1111 ADC chip emulation. + * + * Copyright (c) 2006 Openedhand Ltd. + * Written by Andrzej Zaborowski + * + * This code is licensed under the GNU GPLv2. + * + * Contributions after 2012-01-13 are licensed under the terms of the + * GNU GPL, version 2 or (at your option) any later version. + */ + +#ifndef HW_MISC_MAX111X_H +#define HW_MISC_MAX111X_H + +#include "hw/ssi/ssi.h" +#include "qom/object.h" + +/* + * This is a model of the Maxim MAX1110/1111 ADC chip, which for QEMU + * is an SSI slave device. It has either 4 (max1110) or 8 (max1111) + * 8-bit ADC channels. + * + * QEMU interface: + * + GPIO inputs 0..3 (for max1110) or 0..7 (for max1111): set the value + * of each ADC input, as an unsigned 8-bit value + * + GPIO output 0: interrupt line + * + Properties "input0" to "input3" (max1110) or "input0" to "input7" + * (max1111): initial reset values for ADC inputs. + * + * Known bugs: + * + the interrupt line is not correctly implemented, and will never + * be lowered once it has been asserted. + */ +struct MAX111xState { + SSIPeripheral parent_obj; + + qemu_irq interrupt; + /* Values of inputs at system reset (settable by QOM property) */ + uint8_t reset_input[8]; + + uint8_t tb1, rb2, rb3; + int cycle; + + uint8_t input[8]; + int inputs, com; +}; + +#define TYPE_MAX_111X "max111x" + +OBJECT_DECLARE_SIMPLE_TYPE(MAX111xState, MAX_111X) + +#define TYPE_MAX_1110 "max1110" +#define TYPE_MAX_1111 "max1111" + +#endif diff --git a/include/hw/misc/max111x.h b/include/hw/misc/max111x.h deleted file mode 100644 index beff59c815..0000000000 --- a/include/hw/misc/max111x.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Maxim MAX1110/1111 ADC chip emulation. - * - * Copyright (c) 2006 Openedhand Ltd. - * Written by Andrzej Zaborowski - * - * This code is licensed under the GNU GPLv2. - * - * Contributions after 2012-01-13 are licensed under the terms of the - * GNU GPL, version 2 or (at your option) any later version. - */ - -#ifndef HW_MISC_MAX111X_H -#define HW_MISC_MAX111X_H - -#include "hw/ssi/ssi.h" -#include "qom/object.h" - -/* - * This is a model of the Maxim MAX1110/1111 ADC chip, which for QEMU - * is an SSI slave device. It has either 4 (max1110) or 8 (max1111) - * 8-bit ADC channels. - * - * QEMU interface: - * + GPIO inputs 0..3 (for max1110) or 0..7 (for max1111): set the value - * of each ADC input, as an unsigned 8-bit value - * + GPIO output 0: interrupt line - * + Properties "input0" to "input3" (max1110) or "input0" to "input7" - * (max1111): initial reset values for ADC inputs. - * - * Known bugs: - * + the interrupt line is not correctly implemented, and will never - * be lowered once it has been asserted. - */ -struct MAX111xState { - SSIPeripheral parent_obj; - - qemu_irq interrupt; - /* Values of inputs at system reset (settable by QOM property) */ - uint8_t reset_input[8]; - - uint8_t tb1, rb2, rb3; - int cycle; - - uint8_t input[8]; - int inputs, com; -}; - -#define TYPE_MAX_111X "max111x" - -OBJECT_DECLARE_SIMPLE_TYPE(MAX111xState, MAX_111X) - -#define TYPE_MAX_1110 "max1110" -#define TYPE_MAX_1111 "max1111" - -#endif