From: Konrad Dybcio Date: Mon, 14 Nov 2022 14:36:42 +0000 (+0100) Subject: arm64: dts: qcom: sm8350-sagami: Wire up USB regulators and fix USB3 X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=5a077120bcf6aacf97da75a0f925bfdbe2666815;p=linux.git arm64: dts: qcom: sm8350-sagami: Wire up USB regulators and fix USB3 Wire up necessary supplies to USB PHYs to enable USB3 on Sagami and remove all the limit-to-USB2 properties. Signed-off-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20221114143642.44839-2-konrad.dybcio@linaro.org --- diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi index f7eb30bc4f4d1..3365903cb931a 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -585,25 +585,25 @@ &ufs_mem_hc { status = "disabled"; }; &ufs_mem_phy { status = "disabled"; }; -/* TODO: Make USB3 work (perhaps needs regulators for higher-current operation?) */ &usb_1 { status = "okay"; - - qcom,select-utmi-as-pipe-clk; }; &usb_1_dwc3 { dr_mode = "peripheral"; - - maximum-speed = "high-speed"; - phys = <&usb_1_hsphy>; - phy-names = "usb2-phy"; }; &usb_1_hsphy { status = "okay"; + + vdda-pll-supply = <&pm8350_l5>; + vdda18-supply = <&pm8350c_l1>; + vdda33-supply = <&pm8350_l2>; }; &usb_1_qmpphy { status = "okay"; + + vdda-phy-supply = <&pm8350_l6>; + vdda-pll-supply = <&pm8350_l1>; };