From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Fri, 7 Apr 2023 17:58:06 +0000 (+0200)
Subject: arm64: dts: qcom: sm8250: remove superfluous "input-enable"
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=5a5fd14b22881d60911541750a4d6f66e501ea6e;p=linux.git

arm64: dts: qcom: sm8250: remove superfluous "input-enable"

Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers.  Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407175807.124394-9-krzysztof.kozlowski@linaro.org
---

diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index c96cc9c90a5f4..2f22d348d45d7 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -625,7 +625,6 @@
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	ap2mdm_default: ap2mdm-default-state {
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index bde8bdd2e811f..c16c4231cbfa0 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2433,7 +2433,6 @@
 					pins = "gpio10";
 					function = "wsa_swr_clk";
 					drive-strength = <2>;
-					input-enable;
 					bias-pull-down;
 				};
 
@@ -2441,7 +2440,6 @@
 					pins = "gpio11";
 					function = "wsa_swr_data";
 					drive-strength = <2>;
-					input-enable;
 					bias-pull-down;
 				};
 			};
@@ -2457,7 +2455,6 @@
 					pins = "gpio7";
 					function = "dmic1_data";
 					drive-strength = <8>;
-					input-enable;
 				};
 			};
 
@@ -2475,7 +2472,6 @@
 					function = "dmic1_data";
 					drive-strength = <2>;
 					bias-pull-down;
-					input-enable;
 				};
 			};
 
@@ -2520,7 +2516,6 @@
 					pins = "gpio0";
 					function = "swr_tx_clk";
 					drive-strength = <2>;
-					input-enable;
 					bias-pull-down;
 				};
 
@@ -2528,7 +2523,6 @@
 					pins = "gpio1";
 					function = "swr_tx_data";
 					drive-strength = <2>;
-					input-enable;
 					bias-bus-hold;
 				};
 
@@ -2536,7 +2530,6 @@
 					pins = "gpio2";
 					function = "swr_tx_data";
 					drive-strength = <2>;
-					input-enable;
 					bias-pull-down;
 				};
 			};