From: Kathiravan T Date: Mon, 5 Jun 2023 08:05:31 +0000 (+0530) Subject: arm64: dts: qcom: ipq5332: add support for the RDP474 variant X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=5aa5dbc254be19b7011cb1f9d3cb7e241d5fc986;p=linux.git arm64: dts: qcom: ipq5332: add support for the RDP474 variant Add the initial device tree support for the Reference Design Platform(RDP) 474 based on IPQ5332 family of SoC. This patch carries the support for Console UART, eMMC, I2C and GPIO based buttons. Signed-off-by: Kathiravan T Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20230605080531.3879-5-quic_kathirav@quicinc.com --- diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 70478e584e3d4..354a9734c04bd 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp474.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts new file mode 100644 index 0000000000000..53c68d8c5e5d2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 RDP474 board device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include +#include +#include "ipq5332.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5332 MI01.9"; + compatible = "qcom,ipq5332-ap-mi01.9", "qcom,ipq5332"; + + aliases { + serial0 = &blsp1_uart0; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&gpio_keys_default_state>; + pinctrl-names = "default"; + + button-wps { + label = "wps"; + linux,code = ; + gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; +}; + +&blsp1_uart0 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c_1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc { + bus-width = <4>; + max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board { + clock-frequency = <24000000>; +}; + +/* PINCTRL */ + +&tlmm { + gpio_keys_default_state: gpio-keys-default-state { + pins = "gpio35"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + i2c_1_pins: i2c-1-state { + pins = "gpio29", "gpio30"; + function = "blsp1_i2c0"; + drive-strength = <8>; + bias-pull-up; + }; + + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio13"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio12"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; +};