From: Krzysztof Kozlowski Date: Wed, 22 Mar 2023 19:30:49 +0000 (+0100) Subject: arm64: dts: qcom: sdm850-samsung-w737: Use proper WSA881x shutdown GPIO polarity X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=5b91fab8eae27d1436eacde60107bab9987bbd9d;p=linux.git arm64: dts: qcom: sdm850-samsung-w737: Use proper WSA881x shutdown GPIO polarity The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed DTS always comes with active high. Since Linux drivers were updated to handle proper flag, correct the DTS. The change is not backwards compatible with older Linux kernel. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20230322193051.826167-3-krzysztof.kozlowski@linaro.org --- diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts index 9850140514ba2..41f59e32af644 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts @@ -662,7 +662,7 @@ left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; - powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrLeft"; #sound-dai-cells = <0>; @@ -670,7 +670,7 @@ right_spkr: speaker@0,4 { compatible = "sdw10217211000"; - powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>; reg = <0 4>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrRight";