From: Robert Marko Date: Tue, 22 Mar 2022 10:58:56 +0000 (+0100) Subject: arm64: dts: uDPU: update partition table X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=5e9b59bd37371ef1e627b24483c0388a2567cc1c;p=linux.git arm64: dts: uDPU: update partition table Partition currently called "uboot" does not only contain U-boot, but rather it contains TF-A, U-boot and U-boot environment. So, to avoid accidentally deleting the U-boot environment which is located at 0x180000 split the partition. "uboot" is not the correct name as you can't boot these boards with U-boot only, TF-A must be present as well, so rename the "uboot" partition to "firmware". While we are here, describe the NOR node as "spi-flash@0" instead of "m25p80@0" which is the old SPI-NOR driver name. This won't break booting for existing devices as the SoC-s BootROM is not partition aware at all, it will simply try booting from 0x0 of the boot device that is set by bootstrap pins. This will however prevent accidental or automated flashing of just U-boot to the partition. Signed-off-by: Robert Marko Reviewed-by: Pali Rohár Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts index 95d46e8d081c1..ac64949bb53e6 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts @@ -99,7 +99,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi_quad_pins>; - m25p80@0 { + spi-flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <54000000>; @@ -108,10 +108,15 @@ compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; - /* only bootloader is located on the SPI */ + partition@0 { - label = "uboot"; - reg = <0 0x400000>; + label = "firmware"; + reg = <0x0 0x180000>; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x10000>; }; }; };