From: Valentin Caron Date: Tue, 28 Mar 2023 15:37:23 +0000 (+0200) Subject: ARM: dts: stm32: add uart nodes and uart aliases on stm32mp135f-dk X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=623ac593a360f5c5fe34a002d006844f087549ce;p=linux.git ARM: dts: stm32: add uart nodes and uart aliases on stm32mp135f-dk Update device-tree stm32mp135f-dk.dts to add usart1, uart8, usart2 and uart aliases. - Usart2 is used to interface a BT device, enable it by default. - Usart1 and uart8 are available on expansion connector. They are kept disabled. So, the pins are kept in analog state to lower power consumption by default or can be used as GPIO. - Uart4 is used for console. Signed-off-by: Valentin Caron Signed-off-by: Alexandre Torgue --- diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts index c40686cb2b9a1..f0900ca672b5a 100644 --- a/arch/arm/boot/dts/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts @@ -19,6 +19,13 @@ aliases { serial0 = &uart4; + serial1 = &usart1; + serial2 = &uart8; + serial3 = &usart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; }; memory@c0000000 { @@ -267,8 +274,41 @@ }; &uart4 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep", "idle"; pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart8 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart8_pins_a>; + pinctrl-1 = <&uart8_sleep_pins_a>; + pinctrl-2 = <&uart8_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; +}; + +&usart1 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart1_pins_a>; + pinctrl-1 = <&usart1_sleep_pins_a>; + pinctrl-2 = <&usart1_idle_pins_a>; + uart-has-rtscts; + status = "disabled"; +}; + +/* Bluetooth */ +&usart2 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart2_pins_a>; + pinctrl-1 = <&usart2_sleep_pins_a>; + pinctrl-2 = <&usart2_idle_pins_a>; + uart-has-rtscts; status = "okay"; };