From: Andy Shevchenko Date: Fri, 2 Sep 2022 18:26:38 +0000 (+0300) Subject: pinctrl: cy8c95x0: Fix pin control name to enable more than one X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=641d6cc65dd4b783dd73ecfbface5e7a961c2f11;p=linux.git pinctrl: cy8c95x0: Fix pin control name to enable more than one The Cypress GPIO expander is an I²C discrete component. Hence the platform may contain more than one of a such. Currently this has limitations in the driver due to same name used for all chips of a type. Replace this with device instance specific name. Signed-off-by: Andy Shevchenko Tested-by: Patrick Rudolph Link: https://lore.kernel.org/r/20220902182650.83098-5-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/pinctrl-cy8c95x0.c b/drivers/pinctrl/pinctrl-cy8c95x0.c index 2e46446c05ff8..fa3764e768a4d 100644 --- a/drivers/pinctrl/pinctrl-cy8c95x0.c +++ b/drivers/pinctrl/pinctrl-cy8c95x0.c @@ -1199,8 +1199,7 @@ static int cy8c95x0_setup_pinctrl(struct cy8c95x0_pinctrl *chip) pd->confops = &cy8c95x0_pinconf_ops; pd->pmxops = &cy8c95x0_pmxops; pd->npins = chip->gpio_chip.ngpio; - pd->name = devm_kasprintf(chip->dev, GFP_KERNEL, "pinctrl-%s", - chip->name); + pd->name = dev_name(chip->dev); pd->pins = cy8c9560_pins; pd->npins = chip->tpin; pd->owner = THIS_MODULE;