From: Marcel Ziswiler Date: Fri, 22 Jul 2022 21:54:38 +0000 (+0200) Subject: ARM: dts: imx7d-pico: indent use tabs, no spaces at start of line X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=64bbac6733c14ea652323b61504a4a7328af9174;p=linux.git ARM: dts: imx7d-pico: indent use tabs, no spaces at start of line Avoid the following checkpatch warning: arch/arm/boot/dts/imx7d-pico.dtsi:44: error: code indent should use tabs where possible arch/arm/boot/dts/imx7d-pico.dtsi:44: warning: please, no spaces at the start of a line Signed-off-by: Marcel Ziswiler Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi index e519897fae082..e0bff39e8d3e1 100644 --- a/arch/arm/boot/dts/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/imx7d-pico.dtsi @@ -41,7 +41,7 @@ regulator-max-microvolt = <3300000>; gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>; enable-active-high; - }; + }; reg_wlreg_on: regulator-wlreg_on { compatible = "regulator-fixed"; @@ -432,7 +432,7 @@ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 - MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x1 /* Ethernet reset */ + MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x1 /* Ethernet reset */ >; }; @@ -493,19 +493,19 @@ pinctrl_pwm1: pwm1 { fsl,pins = < - MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f + MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f >; }; pinctrl_pwm2: pwm2 { fsl,pins = < - MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f + MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7f >; }; pinctrl_pwm3: pwm3 { fsl,pins = < - MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f + MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x7f >; };